【Product Features】
1. This product uses high-tech ceramic PTC (Positive Temperature Coefficient) thermistors as heating elements, which heat up quickly. PTC thermistors maintain a constant temperature, stopping the temperature from rising once it reaches the design temperature of the glue gun, preventing damage to the heating element and conserving energy, thereby extending the service life.
2. The electrical insulation strength of this product does not break under a 3750V/minute continuous voltage, and it can be used normally in an AC or DC power supply between 100V and 240V. It is not limited by voltage fluctuations, and it is equipped with a built-in safety fuse for safer use.

【Usage Method】
1. This series of products can be used for rubber strips with a diameter of 7-7.5mm.
2. Insert the adhesive tape into the glue gun at the end, and push it into the barrel. Plug in the power and preheat for 5-8 minutes. Then, pull the trigger to squeeze out the adhesive, and you can control the amount of glue.
3. During use, if a whole rubber band is not used up at one time, do not remove it. You can use it again by plugging in the power and preheating for 5-8 minutes, then use it directly.