repair: Temple knife

u used to trim the sides of the beard hair.

The power of u to push open the razor, then to promote the repair of temple knife switch, veneer shaving.

charge:

to ensure safety, must keep the shaver and plug drying.

u charging must turn off the switch. Charging indicator means to start charging.

cleaning and maintenance:

use the cleaning brush to clean the body, head, do not wash the knife net to avoid knife net damage.

shaver replacement parts:

knife head and knife net wear, please change at any time in order to maintain shaving function.

1. replace the knife:

press knife net release button (opening and closing button), remove the knife net, knife inserted press until a fixed position.

2. blade replacement:

press the outer blade net release button, forced to take a tight knife head at both ends of the cutter head is the shaver in pull vertically, holding both ends of the knife head are the new head is vertically inserted into press until a fixed position so far.

Note:

1. keep the product dry, not at temperature lower than 0 DEG C or higher than 40 DEG C (104 DEG C), under direct sunlight, heat and humid place close to the charge.

2. as the knife net is very thin, if not handled properly, may cause damage to the knife net. In order to avoid the operation of the body, if the knife or knife head is damaged, do not use a razor.

3. cutter head and the knife net is period of use, in order to maintain the good results, it is recommended that you changed regularly (specific operation, please refer to.

4. do not use detergent, salt water, boiling water, diluent, volatile oil, alcohol wash or wipe any part of razor.

health tips:

~ morning 20 minutes after shaving can maintain a clean face. day

~ blade part is easy to breed a large number of bacteria, the use of 2-3 time should be clean.

Razor ~ do not mix with others, to avoid skin disease

repair: Temple knife

u used to trim the sides of the beard hair.

The power of u to push open the razor, then to promote the repair of temple knife switch, veneer shaving.

charge:

u shaver normal charging 8 hours, the rated voltage is 220V 50HZ .

u in 5-35C between charging temperature

u to ensure safety, must keep the shaver and plug drying.

u charging must turn off the switch. Charging indicator means to start charging.

cleaning and maintenance:

use the cleaning brush to clean the body, head, do not wash the knife net to avoid knife net damage.

shaver replacement parts:

knife head and knife net wear, please change at any time in order to maintain shaving function.

1. replace the knife:

press knife net release button (opening and closing button), remove the knife net, knife inserted press until a fixed position.

2. blade replacement:

press the outer blade net release button, forced to take a tight knife head at both ends of the cutter head is the shaver in pull vertically, holding both ends of the knife head are the new head is vertically inserted into press until a fixed position so far.

Note:

1. keep the product dry, not at temperature lower than 0 DEG C or higher than 40 DEG C (104 DEG C), under direct sunlight, heat and humid place close to the charge.

2. as the knife net is very thin, if not handled properly, may cause damage to the knife net. In order to avoid the operation of the body, if the knife or knife head is damaged, do not use a razor.

3. cutter head and the knife net is period of use, in order to maintain the good results, it is recommended that you changed regularly (specific operation, please refer to.

4. do not use detergent, salt water, boiling water, diluent, volatile oil, alcohol wash or wipe any part of razor.

health tips:

~ morning 20 minutes after shaving can maintain a clean face. day

~ blade part is easy to breed a large number of bacteria, the use of 2-3 time should be clean.

Razor ~ do not mix with others, to avoid skin disease

repair: Temple knife

u used to trim the sides of the beard hair.

The power of u to push open the razor, then to promote the repair of temple knife switch, veneer shaving.

charge:

u shaver normal charging 8 hours, the rated voltage is 220V 50HZ .

u in 5-35C between charging temperature

u to ensure safety, must keep the shaver and plug drying.

u charging must turn off the switch. Charging indicator means to start charging.

cleaning and maintenance:

use the cleaning brush to clean the body, head, do not wash the knife net to avoid knife net damage.

shaver replacement parts:

knife head and knife net wear, please change at any time in order to maintain shaving function.

1. replace the knife:

press knife net release button (opening and closing button), remove the knife net, knife inserted press until a fixed position.

2. blade replacement:

press the outer blade net release button, forced to take a tight knife head at both ends of the cutter head is the shaver in pull vertically, holding both ends of the knife head are the new head is vertically inserted into press until a fixed position so far.

Note:

1. keep the product dry, not at temperature lower than 0 DEG C or higher than 40 DEG C (104 DEG C), under direct sunlight, heat and humid place close to the charge.

2. as the knife net is very thin, if not handled properly, may cause damage to the knife net. In order to avoid the operation of the body, if the knife or knife head is damaged, do not use a razor.

3. cutter head and the knife net is period of use, in order to maintain the good results, it is recommended that you changed regularly (specific operation, please refer to.

4. do not use detergent, salt water, boiling water, diluent, volatile oil, alcohol wash or wipe any part of razor.

health tips:

~ morning 20 minutes after shaving can maintain a clean face. day

~ blade part is easy to breed a large number of bacteria, the use of 2-3 time should be clean.

Razor ~ do not mix with others, to avoid skin disease

shopping need to know

The firm 1. default and recommended use Alipay transactions, can guarantee the security of transactions between, if there is no paypal or by bank transfer, and after the remittance, please inform us to confirm payment and shipment. 2. pat next payment to the product delivery a 2-3 days, except in special circumstances, such as: temporary shortages, express the storm warehouse or storm rain very bad weather not control factors! We) and your mood is the same: the faster the better! because of geographical reasons shipped in most parts of the country are required to transfer, if the customer specified consign place directly sent to the specified shipment delivery, such as no us for your generation looking for consignment shipping and freight in cubic count, around the freight rate.

contact

online: Tel: 0579-85583287, 0579-81534192 mobile phone :18867982528, 18858983088 address: Yiwu International Trade City four District No. 73 two floor connections two Street No. 34192

Company map