Product name: outside micrometer
Measuring accuracy: 0.01mm
Surface material: hard alloy
Measuring range: 0-25mm
Packing method: boxed
Product weight: 245g
Features: precise mechanical structure to make reading more intuitive and convenient built-in force limitation
The device ensures accurate repeat reading and high efficiency with one hand
Real - time measurement data of the truth value of the hard alloy measuring surface, to ensure the equipment
Durable stability.
Application: it is used to measure the tolerance of all kinds of shape and size.
Usage: 1. Wipe the measuring surface of anvil and micrometer screw with a soft cloth before use
Wipe clean, rotate the force measuring device to make contact between two measuring surfaces, and observe \"0\"
Whether the bits are aligned, if not \"0\" bit can be used wrench micro adjustment.
2. Use the force measuring device to make the Angle between the two measuring surfaces and the measured workpiece.
Do not read until the dynamometer is turned to make a noise.
3. Use the force measuring device correctly, and don't use it too forcefully or directly
Gauge the casing.
4. The measuring workpiece is carried out in the static state, measuring the axis when measuring
To be in the same direction as measured, see the following figure.
5. Reading method: the minimum reading of micrometer is 0.01mm, as shown in the figure below
Is 15.88 mm.
Note: do not disassemble and install micrometer arbitrarily. Wipe it clean and apply anti-rust oil to it after use
Inside the box, keep the micrometer clean.
Purchase requirements:
Don't use the high standard of hundreds of yuan to measure the quality of a product of more than 20 yuan, alibaba is aimed at wholesalers, not like you this is not good that is not good, then feel free to bad comments, return. You u have high requirements you can choose high-quality products, do not bother, for you and I are trouble. thank you
