【Key 【 product specifications]]
name: Vacuum cleaner car cleaner vaccuum for vehicle for car
brand: che bang shi
weight:0.93kg
color: Blue
specifications:L25×W10×H12.5cm

【Key 【 product Parameters]]
1. Suction flow: above 12mmH
2. Power supply: DC-12V
3. Input function rate: 75W
4. Accessories: duckbill straw
5, the length of wire is 280cm

【Key 【 product Features]]
1. Insert the car cigarette lighter with direct flow 12V to use.
2. The filter bag can be washed and reused.
3. Absorb dust and dry substances.
4. In a good state, it can usually be used for half an hour and has no effect on the battery of the car.

【Key 【 pay attention to matters]]
1. When using, the filter screen must be installed.
2. Do not place it in direct sunlight, high temperature and high pressure.
3. Do not wipe the body with gasoline or strong volatile detergent.
4. The front Shell must not be taken out when the motor rotates.
5. This product is not a toy. Do not let children play with it alone to avoid danger.
6. This product cannot be directly plugged into household power supply, and can only be used in standard 12V power supply.

[Use]]
1. Insert the cigar lighter plug into the cigarette lighter Jack in the car.
2. There is a power switch control key at the top of the handle. Push the control key to the ON position to use it, and push it to the OFF position to stop using it.
3. Replace the suction nozzle depending on the use occasions. The 3-meter-long power cord is enough to cover any position inside the vehicle for dust collection.
4. When using, the suction inlet is flat on the ground to achieve better results.
5. There is a front shell device key in front of the power control key. Press down to remove the front shell. When using it or cleaning it, open the front Shell to clean the filter screen to prolong the service life. Clean the filter screen and keep it away from eyes and ears.
6. This product cannot be used to absorb combustion substances, such as cigarette butts in combustion.

[Cleaning method]
methods for removing foreign objects and filter bags:
1. Remove foreign matter from the mesh bag, press the spring and turn the mesh bag to remove it, insert the hand into the mesh bag to remove the filter bag, and pour out the foreign matter in the filter bag.
2. Cleaning filter bag:
a. Brush filter bag
B. Shake the filter bag in the garbage bag
c. Clean with detergent, wipe with paper towel after cleaning, and confirm whether to keep it clean before using it again.
3. Reinstall the filter bag:
Align the lower end of the filter bag with the mesh bag and install it together, causing the spring to connect with the filter bag.
Cleaning of plastic parts:
Use wet cloth with hot water and mild detergent to avoid using other detergent that may contain chemicals to avoid damaging plastic parts.