advantages
A: it's windy and quiet.
Two: the use of the rear typefan, the loss of heat core and cooling fan that can be avoided
Three: power up to 2000W can be splicing thicker cangue canvas. Awning coatingMembrane structurematerial
Four: in the case of no operation, 15 minutes of automatic sleep, greatly reduce the loss of energy
When the inkjet screen exceedsSpray painting machineAmplitude, many times you need to print again after joining together, as well as to the poster's edge enhancement processing, is traditionally use the cement such as 502 and its derivative type of glue, the bond strength of gluing is slow and not enough problems, such as: blister easily wrinkle, dirty pictures and stable uneven, often must carry on the special processing, such as polished surface, can obtain the good intensity, thus influence the work efficiency, and influenced by temperature and humidity, such as the north agglutination effects under different temperature conditions is bad, and operation of zobah, when work, require relatively large work area.
The use of non-adhesive advertising printing cloth splicing machine (hot splicing machine), can be very good to solve the above problems, the use of cement, and save labor, save time, save labor and save the site, no matter what kind of cloth is used,Light boxCloth, cangjie canvas, no longer restricted in the high cycle machine platform length, as long as there is a relatively flat heat resistant desktop or floor can be at any time operation, for example: as long as 200 meters of seam can be in 30 square relatively flat heat resistant desktop or floor can work.
The machine is based on LEISER's hot air technology and adopts the principle of self-walking heat combination. After a lot of practice, it has been improved and finalized. The structure adopts modular components for easy maintenance.
The machine is small, light, full weight is only 10kg, with adjustable connection speed and temperature control, simple operation, without technical guidance and anyadhesive, depending only on the individual's proficiency and flexibility. In use, as long as both ends of the splicing screen are temporarily fixed, after 2 minutes of starting up and preheating, the roller is aligned to the edge of the splicing, adjust the temperature and speed according to the thickness of the cloth, materials and ground conditions, put down the handle, insert the hot air head to the joint between the upper and lower layers, since the end of the running and pressing, it is finished

Scope of application: inkjet cloth, light box cloth, cangue netcanvas, awning coatingMembrane structure(polyethylene, polypropylene,Polyvinyl chloride (PVC)The splicing of the plane.