1. The rated power of electric kettle is generally large. The capacity of power plug, socket and power cord should be selected appropriately. Generally, the specification of 10A should be selected. If the rated power exceeds 2200W, larger sockets should be used, and these sockets should be used independently to ensure safety.

2. The plug of electric kettle usually has grounding electrode, which should be connected with socket with grounding socket. When using, the power plug should be completely inserted into the socket.

3. Always keep the power plug, socket, power cord and auto switch device of the electric kettle dry and clean.

4. The water injection should not exceed the highest water level to prevent the liquid from overflowing outside the kettle when boiling. Water injection should not be too little, so as not to cause drying.

5. When using the electric kettle, be careful not to let the child touch body or touch the power cord, so as not to cause scald such as accidents.

6. When cleaning, the electric kettle should not be immersed in water or rinsed with water to avoid damage to electrical insulation due to humidity, causing faults and leakage.

7. Do not repair the electric kettle by yourself. During use, if the appliance is damaged and cannot work properly, do not open the shell for repair by yourself, and send it to the repair shop or the manufacturer of the product for repair.

Maintenance Tips

1. In order to prolong the service life of the kettle, mineral deposits within cleaning kettle should be regularly used.

2. When cleaning, be sure to disconnect the power supply first.

3. Please do not soak kettle base in it.

4. Mix vinegar and water into the kettle in the ratio of 1:2, then turn on the power, let the kettle work and wait for it to jump off automatically.

5. Let the mixture be stored in the kettle for 24 hours, then pour it out, then put it into clear water to a certain position, and then work.

6. Pour out the water and the scale and vinegar take away, and finally clean the inside of the pot with clean water. If necessary, repeat the above operations.

7. In the process of using the electric kettle, if there is a fault, take out the kettle from the heating degree chassis, pour out the water in the kettle, and then let it cool to normal temperature before fault detection or cleaning.