Buyers must read: attention
1, and contains pressurized flammable gas, please away from children;
2, and do not puncture or throwing play lighter, do not throwing into fire in the;
3, and please in ventilation environment using, note flammable items;
4, and attempting direction is strictly prohibited towards face, and skin and the clothing, combustible material, so as not to occurred dangerous;
5, and ignition Shi please look out fire mouth of location, moderate by playing ignition. Different style of lighter used different way ignition: is divided into straight playing, and side playing, and side playing; gasoline engine should fast mill wipe wheel, broke into the machine with thumbs since right left fast mill wipe drum;
6, and using Shi, if not carefully has ash, debris off into out fire mouth, should timely forced blow gas to removed debris, otherwise will caused fire bad;
7, and broke into the and gasoline lighter, as machine cover a open, gas on began escape. So, not ignition Shi, please must cover tight machine cover save;
8, and this products does not apply suitable for lighting, do not continued burning over 1 minutes, so as not to high temperature Burns skin;
9, and do not long time will lighter in high temperature environment in the (Celsius 50 degrees/Fahrenheit 122 degrees), and the avoid long time Sun direct, as stoves around, outdoor closed of unmanned carriages and reserve box;
10, and due to elevation 3000 meters above area of climate on burning conditions of limit, Windproof lighter ignition performance and straight into the class will have a serious impact. Recommend the use of open flames such lighters;
11, table lighters, such as crafts while in use, should make clear the burners, by the dozen, air inlet and flame regulator to achieve the proper use of;
12, qualified should use butane gas, bad gas can damage the lighter or reduced service life.
Adjust flame
1, and using Shi, with products containing gas of reduced and around environment temperature of changes, flame height will has must degree of changes, this is normal phenomenon, you can moderate to on flame height for adjustment;
2, and using Shi, normal of flame height should regulation in:
windproof and the straight class lighter for 1.5-2.5 cm; broke into the, and gasoline and the fire class lighter for 2.5-4.0 cm;
3, and if needs on flame height for regulation Shi, Fire dampers with a slotted screwdriver with alignment notch if equipped with adjusting ring of the lighter itself, can be adjusted by finger
toward the (-) arrow direction is clockwise rotation, adjustable low flame heights;
(+) Rotate counterclockwise in the direction of the arrow to increase flame height.
Note: counterclockwise rotation, not normal flame height on the basis of more than half a turn. Otherwise, it may damage this product;
4, petrol lighters should adjust the ignition Wick height to control the flame height. The flame height is too high, using scissors to cut the wick if the flame height is too low, it may be appropriate to pull out the wick.
Filling methods
1, when aerated, absolutely no Mars or around fire, to ensure safety. Do not side smoking side plus gas;
2, and should using qualified of butane gas, inferior gas may damaged lighter or reduced using life;
3, and General models plus gas Shi, please inverted lighter, will gas bottle vent mouth alignment and cover live lighter intake mouth, forced pressure times, each keep 2 seconds around; if gas cannot raises, may is steam box within retained has extra of air, at you can for put gas, with small screwdriver alignment intake mouth rapid put gas 1-2 times, again for plus gas operation;
4, broke into the machine at the time of filling, please use a tool such as a screwdriver loosen the inlet screw covers, and then follow the steps above. Aerated after the screw cap flat, not too tightly; otherwise it will result in a dense canopy cover and cover the sound is not clear, but it will also make the gas escaping. Hardcover type broke into the confidential with dedicated gas mouth tie plus gas;
5, and gasoline engine refueling Shi, should open bonnet, pulled out and turned movement, opened outer sponge joined moderate gasoline,, gasoline infiltrated within layer cotton Hou, cover Shang outer sponge, again sets into machine shell within;
6, and various lighter added fuel Hou, at least to waiting 1 minutes, makes new filling into of gas temperature adjustment to at room temperature State, and, attached in lighter appearance of residual gas volatile completely zhihou to ignition. If the ignition operation, it may cause the lighter appearance of residual gas ignited, resulting in unnecessary danger. Again after refilling, if flame height too high or too low when in use, is a normal phenomenon, can moderate the flame height adjustment.