before use please carefully read this manual
function parameters

function: the apparatus for testing fire gun and shoot bullet muzzle velocity, kinetic energy, firing distance special launch.

test range:
ROF 0-3600 / min (0 - 60 / sec)
bullet muzzle velocity 15 - 800 m / S (50 to 2600 ft / sec)
0-500J
1M projectile kinetic energy level range 0-400 meters (0 to 1250 feet)
accuracy: test error is less than or equal to 1.3%
working voltage: DC 4.5V
working temperature: - 10 to +50 DEG C
size: 95 X 93 X 39 MM
instrument weight: 220 g
standard equipment can be installed a camera tripod

operation

The lower part of the battery cover is opened instruments into 3 AAA batteries

test instructions:
- key - switch / select key ^ - up key / display key key size voltage - down / enter the menu key

boot: Press - key 0.5 seconds, open the instrument, the display screen display page in Figure 1, then according to a bond - Figure 2 shows the page, in the 1 or 2 page "button to display according to the battery voltage, as shown in figure 3.

shutdown: Press - key instrument can be closed at about 1.

Figure 1 shows the page kinetic energy, projectile mass, velocity, rate of fire gun bullet minutes etc.. When the fire test, display * * * m/s, said the value of the average velocity of bursts.

Figure 2 page display unit area energy, bullet caliber, firing distance, gun firing rate data in seconds.

Figure 3 page display instrument battery, when the battery is depleted when the instrument display (Low Voltage) low battery warning and automatic shutdown.

Automatic shutdown: energy saving 1-30 minutes (self setting, the factory is set to 5 minutes) for any wrong operation instrument, the instrument will automatically shut down.

set menu:

You press the button to display the Figure 4 table setting function, we again press the keys to move the cursor position

1 (AUTO POWER OFF) is a set of automatic shutdown

second (DATA PALYBACK) is the latest 20 sets of test data (shutdown reset)

third (SET MEMORY) is a set of shell weight and caliber bullet

fourth (UNIT) is a set of metric or imperial units display

fifth (RESET) is reset to the factory data (zero)

sixth (BACK LIGHT) as the backlight option instrument

1 (AUTO POWER OFF) is a set of automatic shutdown, can set 1-30 minutes without operation automatically shut down. Press the button and then the key - - move cursor to desired time, press the button and then press - selection, we put the cursor keys to EXIT, according to figure 4 - the key to exit the menu, the menu in Figure 1 to last long key.

second (DATA PALYBACK) is the latest 20 sets of test data (shutdown reset), after entering the 20 test group can see recent memory data (Fig. 5). According to the "key or keys to view you, press the - key to exit.

third (SET MEMORY) is set inside the instrument memory shell weight and bullet caliber (SET MEMORY), the cursor move, according to the key - into the instrument memory (memory table table, there are 6 kinds of bullets, the first use of instrument preset for the first 6mm, 0.2g Bb, such as shown in figure 6. According to the "keys to move the cursor) ammunition to be selected, then press the button to determine the selection, after the success of this will occur before", "as a symbol, the data in the table to modify the special bomb own weight, then the numerical aperture," and "symbol to the. Then press the button to enter the bomb - heavy caliber (WT) or (CAL) - according to figures, key or we put the cursor keys to adjust the bullet numerical back to EXIT, press the button to exit the menu to figure 4 -. Note:
instrument for calculation of kinetic energy per unit area, such as kinetic energy, firing distance according to the results of this set of numerical and measured bullet velocity.

fourth (UNIT) is a metric or imperial units display settings, you can set the display unit for meters or feet (M) (FOOT/FEET). The instrument is set to the initial metric velocity displayed as M / S (m/s), such as to display unit display inch (f/s) feet / sec (FPS).

fifth (RESET) is to restore the factory data reset operation, data recording instrument in the table of the weight and diameter value of the factory data, and make the instrument set to factory default state.

sixth (BACKLIGHT) can choose whether to open the screen back light.

Note: 1
test When testing the best use of the firing mouth adapter cap, so as not to hit the instrument panel.
2 The test is carried out in a safe environment, to prevent the bullet gun rebound hit others or self injury.
3 When used outdoors, do not test in the environment of rain or sand and dust, otherwise it is possible to damage the instrument.
4 The instrument may be damaged when the gun is fired by a bullet and the kinetic energy of more than 100 Joule, or the high dynamic function bullet can hit the fire tube.

- customer service service

Note: 1
warranty Product quality customer service problems in use, 15 days replacement, one year warranty, life-long maintenance.
2 Buy this product, please fill out the warranty card and the receipt and send it back to the company, fill out the unclear or not timely fill will affect your product warranty.
3 After the warranty period, the need to provide maintenance services, only part of the cost of charging.
4 All due to human factors or force majeure caused by product damage, only to provide maintenance services.

is not included in the scope of warranty: 1
Products due to flooding and failure.
2 Man-made damage, self anatomical demolition, modification or improper use of the damage.
3 The test allows high kinetic energy bullets hit the fire tube to cause damage to the instrument.