Flicking the switch after the power is switched on the machine power on position, thermostat, the heating plate cutter after displaying a light, Rotary temperature control knob to set the temperature on the value line, preheated 5-10 minutes, will start working. Heating plates for working temperature100-160degrees centigrade.

When will wrap placed on a stick in the box cavity after upward on the opening cover, packaging film, after pull tight when appropriate, packaging of goods needs placed on the cover, pull the film, after the packaging of goods, packaging film on the cutter cut on a heating plate after sealing, packaging end.

If only cutting in the work, will power up switch plate to the cutter location to work.

When cutting or heating plate when the sticky dirt, clear with a cloth do not use metal scraping and other rough hard objects. Dirt is cleared to safety.

If display does not light, or cutter, the heating plate is not hot, should stop cutting off the power supply, check and troubleshooting.

Not operating switches with wet hands or pulling power plug

The fuse is damaged, shall not be greater than the original specification ( 2 amp) fuse replacement

When using the machine, be careful not to cut knife, the heating plate is scalded or burned clothing

After work, you should pull the plug. Pull the plug should not be pulling the power cable, hands gripping the plug should be used.

Machines should hand use special maintenance. Not a professional maintenance personnel, should not be demolished. Warranty if the user is inexperienced, without warranty.

Machine's operating voltage is 220V , packaging film sealing temperature up to 160 degrees, cutter rated power 50W

This machine is used for packaging of fruit, vegetables, fish and buffets and so on.

Machinery shall not be placed in the vicinity of flammable substances used

Before using the machine, machine must be grounded to ensure safety