better quality, better service!!!
details please consult: landline: 0579 -89355500
phone: 18257926263


product information:

cylinder cold drink machine

voltage: 220V

power: 400W/h

product size: 535*520*808mm

product volume: 0.1CBM

product volume: 18L

product weight: 25KG

Note: the cold / hot

cylinder cold drink machine

voltage: 220V

power: 400W/h

product size: 460*445*700mm

product volume: 0.14CBM

product volume: 18*2L

product weight: 35KG

Note: the cold / hot

three cylinder cold drink machine

voltage: 220V

power: 500W/h

product size: 710*445*700mm

product volume: 0.22CBM

product volume: 18*3L

product weight: 25KG

Note: the cold / hot

products

Product use:

 

	1、用前先把切削刀和离心过滤器旋紧然后把安装离心过滤器和切削刀的上箱紧固在底座上，再接通电源；



	2、待电动机转动正常后再投放食物；



	3、投放的食物量不应过大、过厚、过硬，以免损伤切削刀和造成电机超载；



	4、离心过滤器内不应贮存过多的食物碎未，要及时清理，否则易引起震动；要经常保持榨汁机体内外清洁。在每次使用后认真清洗。但清洗时切不可用水龙头冲洗，榨汁机下部的底座，更不要将机体放在水里，以免电器部分的绝缘部分被破坏。



	

Customers need to know shopping

4 note editor

1. Please put it on the hard counter in a horizontal way. Special attention should be paid to the malfunction of the machine when the counter is inclined or uneven.

2, please be sure to put on the ground and leakage protection switch.

3, please do not use hand or stick inserted in mechanical root. Because if the motor rotates, it will be dangerous.

4, in use before or in use, please check the wire (1.5mm square wire is appropriate). If the wire plug contact with bad or damaged wire, still use, will occur when the risk of electric shock or fire.

5, beverage cylinder please wash every day to keep clean.

6, after the start of the machine must be more than 5 minutes after the restart, the voltage is not stable, with 2000W above the regulator.

7, please install the ventilation equipment in good place, the machine must have more than 15cm of space, in order to ventilation.

8, please use the mechanical special plug, do not use a socket with other electrical appliances.

9, please install the environment temperature is below 35 degrees, refrigeration, drink temperature not exceed 40 degrees.

10, it is strictly forbidden in the heating or cooling work state, the conversion to refrigeration or heating work condition, otherwise damage the compressor.

5 cleaning and operation instructions

1, the harvester will big leather ring according to the original shape is sheathed in the containing cylinder sealing ring must flat. Then aiming at evaporator vertically downward, pay attention to the pump body vertically downward forced flatten, not tilting back. Must be cleaned before use, concrete steps:

1) will be the heavy mad gently upward

2) used in military will spray pump seized, gently to dial the spray pipe rotation to spare (spray) by hand mixing blade removed from the stir the supporting sleeve (mixing). Note: don't forget to install the sealing ring.

3) after the removal of the above parts, the hands slowly to the upper swing cylinder holding tank, if you have difficulty, it is necessary to stainless steel evaporator and washer wet. After cleaning the components, re installation, using the opposite method to operate, note: the machine of the plastic and rubber parts, please do not use 80 degrees Celsius above water, so as not to damage parts.

2, starting work: when all parts of the device is finished, into the beverage, when the use of heat function, must be filled in 6 liters or more drinks. The temperature regulator to 50-65 degrees Celsius for the best, is strictly forbidden to drink hot, otherwise damage to the refrigeration system heat parts. Dear user, according to the different types of machinery you choose to use the following ways to start work.

(1) first, press the fountain / stir series switch, and then go up to the refrigeration switch, the machine enters the refrigeration state, the temperature is below 5 degrees Celsius, close to 0 degrees celsius.

(2) if it is necessary to heat the heating, the fountain and the series switches are made, and the temperature is adjusted to the temperature you need. If you do not need one cylinder heating, the cylinder should be adjusted to the stop position, according to the circumstances of each cylinder can be individually adjusted to the temperature you need.

Telephone: 0579 --89355500

cell phone: 13989432700

URL for the Email:avelyn.cai@hotmail.com
SKYPE:avelyn.cai.hotmail.com
: www.dreamdar.cn

map