【Usage Instructions】:

 Flat air tanks are usually disposable, and once they're used up, they can't be re-inflated. However, as long as you have this conversion valve, you can refill your empty flat air tank.It can be safely reused again.

 【Usage】:

 By using this safety inflatable valve, you can inflate large bottles of liquid propane directly into flat cans for home use.

Step 1: Prepare the materials you need (gas can, air valve, electronic scale, empty flat gas cylinder)

 Step 2: Check if the air valve is intact, and turn off the switch at the flat air interface!Step 3: Attach the gas fitting to the gas cylinder, and after connecting, open the liquefied petroleum gas valve to check for any leaks at the connections, ensuring safety before inverting the liquefied petroleum gas cylinder.

Step 4: Connect the empty flat air tank to the toilet valve.

Step 5: Observe the flow of the liquefied gas in the tube and the change in the numerical value on the electronic scale.Connect the inflatable valve of the flat tank to the electronic scale, generally do not collect.Weigh the product after peeling the skin, as there might be residual product in the can. If we remove the skin before weighing, there might be an overfilling situation.In the gas process, it canTo observe the amount of air charged in real time, it is generally recommended to charge slightly less than the original air tank, which is 370g. Generally, charge to 340g.Enough!

Step 6: After the air is fully charged, there will still be liquefied gas in the air valve pipeline. At this time, you only need to connect the air valve to the flat tank, close the liquefied gas bottle valve, and press the button.Open the flat canThe air valve will allow the liquefied petroleum gas (LPG) to automatically flow into the flat tank, ensuring that there is no residual LPG in the air valve.

 Attention: For air tanks that have been refilled more than 6 times, it is recommended to discard them. When inflating, please do it at the ventilation, and do not refill them near open flames!Gas filling mostGood is filledAbout 95%, if it's too full, you can install the burner without lighting it, turn it on for a moment, and when you see no liquid coming out of the nozzle.Ejection is the normal burningAir pressure.