Fruit peel contains a large amount of harmful residues such as pesticides, which are generally difficult to clean. Therefore, fruit needs to be peeled and eaten. However, traditional manual peeling and peeling will bring out a lot of pulp at the same time, not only does it cause great waste, but also the speed is very slow. This second generation of fruit peler, with exquisite design and convenient operation, not only does it not waste pulp, but also the speed is super fast! After this product is used skillfully, you can get an apple in three seconds. Due to this efficient and convenient peeling process, you need a lot of essential items when cutting fruits!

Product features:

using Apple Peeler, cutting fruit is simple, easy and interesting!

Especially when cutting a lot of fruits, it is a must-have product.

The round cutter head is peeled with the rotation of the fruit shape, so the fruit skin is very thin and does not bring out a lot of pulp. It is safe and efficient to peel.

This model is applied to round fruits of similar size to apples, and small fruits cannot be used.

1. First fix the peeler coat on the smooth surface and remove the knife and peeler and the coat on the fixing needle.

2. Rotate the handle to turn the peler frame under fixing needle, and then insert the bottom of the apple into the knife and fork.

3. Turn the rotating handle clockwise until rotating plate turns for a week. Press the fruit removal button and the cut Apple can be taken off. Note: please turn the blade to the bottom of fixing needle, to ensure that you will not scratch your fingers when taking apples. When peeling, do not place your fingers where peler can cut, and pay attention to safety.

4. After using it, rinse it with water. After drying it, install a knife and fixing needle sets, and put it in a place where children are not easy to get. Because the rotary peeling, the peeling process is extremely interesting. Children in their families must pay attention to safety. Change the blade: loosen the screws on the peler frame, take out the old blade, install the new process blade, and tighten the screws.