1. RESET (reset button)

Clear the last set of functions and program settings, and then set the required functionality.

1. SPRAY (jet button)

Push this button, machine will delay 4 sec injection time, indicator light will be blinking green light and red light all three times, and then spray a, to the working state of the test machine is normal.

1. MODE (mode)

When you press the button for 2 seconds when the LCD screen will appear in the following 5 modes:

START (start time of injection), STOP (stop spraying time set), INTERVAL (injection time interval set), WEEK (working set), CLOCK (clock set)

1. WEEK (week)

Press this button, you can set the work of the 3 gear:

1.2.3.4.5 (said the machine works from Monday to Friday).

1.2.3.4.5.6 (said the machine works from Monday to Saturday).

1.2.3.4.5.6.7 (said the machine works from Monday to Sunday).

1. HOUR (H)

By this button, you can set the clock time, you can also set the time from 0 to 24 points to control the work of the machine.

1. MIN (min)

You can press this button, a few minutes can set the clock, you can also set the machine 160 minutes of injection interval.

1. ON/OFF (on / off)

Press this button to set the machine on / off.

Please note: press this button, the LCD screen will display "ON", press the SPRAY machine will delay 4 seconds a jet, green and red light will blink 3 times, and then sprayed once in normal working condition. Press this button again, the LCD screen displays "OFF", and the machine will stop working. But the LCD screen still displays the time of the clock. When the display OFF, in addition to the RSET key, the other keys are invalid.

LED dual color indicator light

When you press the on / off button to "on", double color LED began alternating flashing red 3 times and green three times, then the machine injection time; injection is completed in the normal working state, double color LED start every 2 seconds flashes a green, flashing time of every 0.3 seconds.

LCD liquid crystal display

When the lower left corner of the LCD screen shows the sign of low battery power, the battery is low and needs to be replaced. Low power display can be seen how much power, 2.2V shut down, LCD will show no electricity symbol. At a time in the future to replace batteries in the machine shutdown state, as long as can replace the battery in a minute, before setting the parameters of the good do not need to re set; but if the replacement batteries for more than 1 minute, set the parameters will be cleared and need to re set.

In the mode, the "appears on the LCD screen, the number of injection machine will appear in the middle of the liquid crystal screen usually shows the number of minutes; in general, a perfume cans can jet 3000 times when the injection times reached 3000 if to remove spray number display, in the mode, long press on / off button according to five seconds clear. )