1. RESET ( reset button)

Clear the last set of functions and program settings, and then set the required functionality.

1. SPRAY ( injection button)

Push this button, the machine will delay 4 second injection time, indicator light will be blinking green and red the 3 times, and ejecting a, to the working state of the test machine is normal.

1. MODE (mode )

When you press the button for 2 seconds, so the following 5 patterns on the LCD screen:

Start the injection time set ) , STOP (stop jet time setting ) , INTERVAL ( injection interval time ) , WEEK ( week set ) , CLOCK ( clock settings )

1. (WEEK weeks)

Press this button, you can set the work of 3 gear:

1.2.3.4.5 (said the machine works from Monday to Friday).

1.2.3.4.5.6 (said the machine works from Monday to Saturday).

1.2.3.4.5.6.7 (said the machine works from Monday to Sunday).

1. HOUR ( hours)

By this button, you can set the clock time, you can also set the time from the 0 point to the 24 point of the control machine.

1. MIN ( minutes)

Press the button can not only can set the clock a few minutes, also can be to set the machine 160 minutes injection interval time.

1. ON/OFF (open / off )

Press the button, you can set the machine to open /.

Please note: press the button, the LCD screen will display the ON, press SPRAY machine will delay 4 seconds one time jet, indicator light will flash green and red the 3 times, then spray a enter normal working state. Press this button again, the LCD screen displays "OFF", and the machine will stop working. But the LCD screen still displays the time of the clock. When the display OFF, in addition to the RSET key, the other keys are invalid.

LED dual color indicator light

When you press the button ON/OFF to ON, double color LED began alternating flashing red 3 and green 3 times and then machine injection time, injection is completed in the normal working state, double color LED started every 2 seconds flashing in a time green. Each flash Shuo time 0.3 seconds.

LCD liquid crystal display

When the lower left corner of the LCD screen shows the sign of low battery power, the battery is low and needs to be replaced. Low power display can be seen how much power, 2.2V shut down, LCD will show no electricity symbol. At a time in the future to replace batteries in the machine shutdown state, as long as possible to replace the battery in a minute, before setting the parameters of the good do not need to re set; but if you replace the battery over 1 minutes, set the parameters will be cleared, the need to re set.

, "the ACCOUNT in MODE mode on the LCD screen, the number of injection machine will appear in the middle of the liquid crystal screen usually shows the number of minutes; in general, a perfume tank can spray 3000 when the injection times reach 3000 if to remove injection number display, in MODE mode, long press the button ON/OFF according to five seconds clear. )