【Key 【 product specifications]]
name: Vacuum cleaner car cleaner vaccuum for vehicle for car
brand: che bang shi
weight:0.93kg
color: Blue
specifications:L25×W10×H12.5cm
【Key 【 product Parameters]]
1. Suction flow: above 12MMH
2. Power supply: DC-12V
3. Input function rate: 75W
4. Accessories: duckbill straw
5, the length of wire is 280cm
【Key 【 product Features]]
1. Insert the car cigarette lighter with straight stream 12V to use.
2. The filter bag can be washed and reused.
3. Absorb dust and dry substances.
4. In good condition, it can usually be used for half an hour and has no effect on the battery of the car.
【Key 【 pay attention to matters]]
1. When using, the filter screen must be installed.
2. Do not put it in a place with direct sunlight, high temperature and high pressure.
3. Do not wipe the body with gasoline or highly volatile detergent.
4. The front Shell must not be taken out when the motor rotates.
5. This product is not a toy. Do not let children play alone to avoid danger.
6. This product cannot be directly plugged into household power supply, but can only be used in standard vehicle-borne 12V power supply.
[Use]]
1. Insert the cigar lighter plug into the socket of the cigarette lighter in the car.
2. There is a power switch control key above the handle. Push the control key to the ON position to use, and push it to OFF to stop using.
3. Change the suction nozzle depending on the application occasion. The 3-meter long power cord is enough to cover any position inside the vehicle to absorb dust.
4. When using, the suction inlet should be flat on the ground to achieve better effect.
5. There is a front shell device key in front of the power control key. Press down to remove the front shell. After using or cleaning, open the front Shell to clean the filter screen to prolong the service life. Keep the filter screen away from eyes and ears.
6. The use of this product cannot be used to absorb combustibles, such as cigarette butts in combustion, etc.
[Cleaning method]
methods for removing foreign matters and filter bags:
1. Remove foreign matter from the mesh bag, press the spring and turn the mesh bag to remove it, insert the hand into the mesh bag and take out the filter bag, pour out the foreign matter in the filter bag.
2. Cleaning filter bag:
a. Brush filter bag
B. Shake the filter bag in the garbage bag
c. Clean with detergent, wipe with paper towel after cleaning, and confirm whether to keep clean before using again.
3. Reinstall the filter bag:
Align the lower end of the filter bag with the mesh bag and install it together, so that the spring is connected with the filter bag.
Cleaning of plastic parts:
Use wet rag with hot water and mild detergent, avoid using other detergent that may contain chemicals to avoid damaging the plastic part.