a large number of goods, the price is not the price of packaging

Product introduction:

1. read and write SD card (T-Flash card), mobile phone memory card

2. plug portable little and dainty.

3. supports hot plug, plug and play function

No-load current 80MA USB interface without external power supply

speed: USB2.0

weight: 12 grams of

size: 9mm * 19mm * *48mm

color: blue green orange purple black

specifications: Micro TF card, SD card (without card)

1, support T-Flash\MicroSD card

2, support USB2.0 standard, compatible with USB1.1 standard

3, plug the t-card with U disk function, can be made into a boot disk, support plug and play

4, maximum transmission speed: 480Mbps

5, Windows 2000/XP or MAC OS8.6, 9.x does not need to drive the

Reader: how to correctly use

With TF card slot 1: tail, the metal contact piece of the TF card face down gently inserted into the card slot, you will feel the TF card and the card reader has obvious "stuck" feeling, TF Card installed. If the installation error can not be inserted into the TF card slot, please change the direction of the installation, not to, so easy to cause reader sheet metal damage.

2: access to the computer, insert the USB interface of the computer, the computer right below the toolbar will prompt "found new hardware and the driver did not drive will be installed automatically, with antivirus software will automatically scan, please wait for a series of computer program after the completion of the next step. After a few seconds, the computer prompts "new hardware can be used", in "my computer" you will see the discovery of their "mobile storage devices".

3: copy data need to pay attention to, according to the computer system and computer configuration and the size of the data and the size of different types of data, copy speed will not be the same. In the working state, please wait for the completion of the data complete copy, and then press the step to pull out the card reader, if the direct pull out the card reader, easy to cause the damage to the card reader.

A copy of the 4:, and close all card reader on the window in the left key computer bottom right click on the toolbar, select "completely remove hardware", the computer prompts the "safely remove", then you can unplug the card reader, OK, to complete the work

5: card reader should be stored in a dry place, do not use can be placed in a small box. Avoid water to enter, avoid high temperature, avoid falling from a height.

Note:

Don't at a reader is reading data stored on the card reader or unplug the card card unplug from reading, otherwise may cause the destruction of data on your card.

pictures: