Model: 7306

Net weight: 214g

灯泡: CREE XM-L2 + COB 白光 / CREE XM-L2 + COB 红光

Battery: 2 * 18650 battery / 3 * AA battery

Material: aluminum alloy + ABS plastic

Color: COB 100 light / COB red

Switch: push switch

Stalls: 4 files & nbsp; middle L2 lights light - middle L2 lights low light-COB lights bright-COB lights flash

Charging mode: micro Samsung interface charging

Zoom mode: mechanical zoom

Features: With SOS help whistle, charged display function, with charging indicator

Factory direct sales & nbsp; & nbsp; & nbsp; integrity management & nbsp;
& Nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp;

Note: The price does not contain the battery charger, for the battery charger, please contact customer service price

Price is for reference only, please go to the store consultation, thank you

First, the use of instructions

1. Check the battery: Make sure the battery is energized and fit in the correct direction;

2. flashlight in use, according to the flashlight on the voltage and battery requirements to choose, can not be used to prevent burning circuit board, different models, different voltage batteries do not use;

3. In the use of the flashlight when the brightness of a significant change in the time to turn off the flashlight to prevent the battery power over discharge, and timely charge; pay attention to the battery waterproof, moisture, drop, charge charging according to the charger, Light change, the timely removal, do not overshoot;

4. Do not use the battery for a long time, the battery should be filled and saved, normally in about three months and then charge and discharge once to avoid chemical corrosion;

5. The lamp cup wall to keep clean, absolutely can not be wiped by hand or hard objects, remove the fingerprints on the lens, cotton swab dipped in the lens cleaner gently wipe;

6. Do not keep the flashlight long-term with sunlight, water, chemicals and corrosive gases, etc., to avoid damage to the flashlight;

7. Do not disassemble the flashlight to prevent damage to the circuit board.

Second, pay attention to matters

1. Can not direct light exposure to the eyes, so as not to cause eye damage;

2. Do not overpressure use, the voltage should not exceed 4.2V, the battery should not reverse, otherwise it will burn the circuit board;

3. When charging, please look for the positive and negative charger, do not overcharge the battery, so as not to damage the battery life (charging time is generally 5-8 hours)

4. When using the torch, check the thread at the tightening without loosening, otherwise it may cause not bright light;

5. Flashlight should be avoided in the sun or high temperature environment placed, stop using the battery after the battery is stored in a cool and dry place;

6. flashlight with life waterproof ability, the general rain will not be a problem, but do not have the diving function, do not carry this flashlight dive or a long time on the basin,

7. To keep the O-ring (sealed apron) and thread rotation smoothly, please 2-3 times a year in its surface wipe Vaseline oil and so on.

Third, the charging instructions

Inadequate time should be added to avoid affecting the battery life, the battery should be stored for a long time during the battery charge. & Nbsp; & nbsp; & nbsp; & nbsp;

Jun strong flashlight factory direct sales integrityMainFlashlight, headlights,carlightDiving lights, such as jade special high-grade aluminum flashlight and stainless steel flashlightThe Company upholdCustomer first, Sharp into thetakeBusiness philosophy, adhere tocustomerThe first oneThe principle of good quality,Reasonable prices for our customers to provide quality services, welcomed the new and old customers patronize!

Contact information

Jun strong flashlightCloud Electronics

Phone:Wu Qingyun

Tao Xiaojuan

Company's main page: