Lifting weight: 2T

Minimum height: 90mm

Lifting height: 275mm

Maximum lifting height: 365mm

Baby weight: 2.3kg

Package size: length: 42.5cm* width: 10.5cm* height: 9.5cm(measurement error: 1-2 cm)

(applicable to general cars, such as santana, buick, etc.)

The product is transformed into the lifting motion of the arm through the rotation motion of manually operated screw, which is featured with compact structure, convenient operation and safe use. Therefore, it is widely used in cars, pickups, light vehicles and other vehicular essential tools!

Can carry along with the car, compact and convenient. Especially frequent business trip, travel, long - distance travel necessary for the car. When you need to change or repair the tire, you can use it at any time. Simple and convenient operation. A few handshakes will lift the car.

This manual jacks is made of steel, no matter the strength or fastness, which cannot be compared and surpassed by other materials. And the operation is simple, cheap and good, is worth having one.

Usage and precautions

1. Before lifting, stop the vehicle on the level hard road, pull the hand brake and stop the wheel, and open the danger warning sign.

2. Stop the wheel on the opposite side of the tire, loosen the nut of the wheel, but do not screw it off.

3. Insert the handle into the screw jack, and shake the handle to the appropriate height by clockwise lifting.

4. Place the jack under the lifting position specified by the automobile factory, turn the handle clockwise to make the saddle of the jack contact with the lifting position, and check whether the contact is safe and reliable

5. Then, shake the handle to raise the roof of the vehicle to the appropriate height, change the tire and pre-tighten the nut.

Warning: when using jacks to support the vehicle, it is strictly prohibited to work under the vehicle. Safety supports must be used before they can enter the bottom of the vehicle.

Attention: jacks do not overload use!

Attention: in order to ensure the normal operation of the jack, please keep the screw pair of the jack clean and lubricated.