1. Range: 500g Division value 0.1g & nbsp; & nbsp;

2. Power: two 1.5V battery

3. A variety of unit conversion: g / tl / oz / ct / gn

【Features】

1. High-definition backlight function

3. With self-return to zero, automatic shutdown function

4. With voltage shortage and overload prompt function

5. Display: LCD display auto backlight

6. Self-test, automatic school function,

Buckle / peel how to operate:

1, boot zero;

2, will buckle heavy objects on the weighing pan;

3, press the peel button to display 0.0, that has been deducted;

4, and then put the items to be weighing, this time the reading is the net weight of the items

Use:

1, the maximum weighing of this product should not exceed its maximum range.

2, overload will permanently damage the product.

3, the product can not be exposed to a very cold or extremely hot environment, in the normal environment, the product can work well, before use, so that the product in a new environment to adapt for at least one hour.

4, before use, start with a weight weighing several times to make the internal components of the warm-up, which will make weighing more accurate.

5, the product on a clean environment, dust, moisture, vibration, air, or electromagnetic interference will be the stability of the product and the accuracy of adverse effects.

6. To gently, weighing the items should be gently placed on the weighing pan, so as not to weigh inaccurate or damage the internal parts of the scale.

7, because the product is a high precision products, so use very carefully, to avoid vibration or fall.

8, in the stable and windless level of use.

⊙ Please ensure that the use of electromagnetic interference around 50cm, so as not to affect the accuracy

⊙ Please use in 10-30 ℃ environment, the temperature difference is too large may produce errors

Troubleshooting:

Weighing inaccuracies or failures The primary factor in battery power is insufficient, calibration is incorrect, overloaded, or operated on non-horizontal surfaces. Please note the points mentioned above to properly use and maintain your product.

1, do not show or show the lack of electricity symbols [lo] need to change the battery;

2, [EEEEE] overload, should immediately remove the overloaded items;

3, [o_ld] Damage to internal core parts of the scale due to incorrect operation (eg impact, drop or overload), try re-calibration. If the sensor is not severely damaged, it can be used after recalibration.

4, show 88888, please work in a plane without vibration, stable