Model: YD-13

Size: 10.5cm (diameter) * 11.8cm (height)

Net weight: 323G

Bulb: 3 * white LED (SMD) + 1 * yellow LED (SMD) + 2 * color LED

Battery: Built-in battery

Material: ABS + silicone & white light - white light - yellow light - lantern

Switch: press the bottom of the switch

Charging method: micro USB charging

Gear:3 * white LED (SMD) * 1 * Yellow LED 2colorLED

Factory outlets integrity management
Large amount of custom printed LOGO

& nbsp;

Price is for reference only, please consult the store, thank you

First, the use of instructions

1. Check the battery: Make sure the battery is on and charge the flashlight in the correct direction;

2. Flashlight in use, according to the flashlight on the voltage and battery requirements of choice, can not be used indiscriminately to prevent burn circuit boards, different models, different voltage batteries do not use at the same time;

3. In use, when the brightness of the flashlight obvious changes to turn off the flashlight to prevent over-discharge of the battery and timely charging; note the battery waterproof, moisture-proof, drop-proof, charging according to the charger charging speed, indicating Light change, promptly removed, do not overshoot;

4. For a long time not to use the battery, the battery should be filled and stored, normal charge and discharge in about three months time, to avoid chemical corrosion;

5. Light cup wall to keep clean, absolutely can not be wiped by hand or hard objects, remove the fingerprints on the lens, swab gently with a cotton swab dipped in lens cleaner;

6. Do not long-term flashlight and sunlight, water, chemicals and corrosive gases and other contacts, to avoid damage to the flashlight;

7. Non-professionals do not disassemble the flashlight to prevent damage to the circuit board.

Second, matters needing attention

1. Do not direct the light rays to the eyes, so as not to cause harm to the eyes;

2. Do not over-voltage use, the voltage should not exceed 4.2V, the battery do not reverse, otherwise it will burn the circuit board;

3. When charging, please look for the positive and negative of the charger, do not overcharge the discharge cell, so as not to damage the battery life (charging time is generally 5-8 hours)

4 in the use of flashlight, check the thread tighten without loosening, otherwise it may cause the goods are not bright;

5. Flashlight should be avoided in the sun or high temperature environment, stop using the battery please remove the fully charged and stored in a cool dry place;

6. Flashlight with waterproof life, the general rain will not be a problem, but do not have the diving function, do not carry this flashlight diving or long time on the basin, bath;

7. To keep the O-ring (sealant ring) and the thread rotating smoothly, wipe Vaseline oil on the surface 2-3 times a year.

Third, charging instructions

Shortage should be promptly added, so as not to affect the battery life, the battery for a long period of time also have to charge the battery. & nbsp; & nbsp; & nbsp; & nbsp;

 Jun Qiang factory direct sales credit card integrity& nbsp;Main:Flashlight, headlights,carlight,Diving lights, according to special jade and other high-grade aluminum flashlight and stainless steel flashlight. Company uphold"Customer first, Determined to entertake"Business philosophy, adhere to"customerHousehold first"The principle of good quality,Reasonable price for our customers to provide quality services, welcomed the new and old customers patrons!

Contact information:

Jun Qiang flashlight& nbsp;Cloud Mai Electronics

Phone: (0)13566558058 & nbsp; & nbsp;Wu Qing Yun

& nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp;(0)18857982250 & nbsp; & nbsp;Tao Xiaojuan

Company's main page:http://ywyunmai.1688.com/