Product features:

1. Do not use adhesive, nor heat to melt, just tear off the insulation layer, and then firmly adhere to the base. Convenient construction and quick construction.

2. With rubber elasticity and strong elongation, it can adapt to the deformation and cracking of the base.

3. With the intention of adhesion to the grass roots, the adhesion is often greater than its shear force (adhesion surface fracture).

4. Self-healing, that is, when the material is inserted into a puncture or hard object, it will be integrated with these objects, so it can maintain good waterproof performance.

5. Construction safety, pollution-free environment, simple and clean construction, easy to do site civilization construction.

6. In addition to the main material, the surface material polyethylene film also has good waterproof and improved strength (the surface part of the aluminum foil coil) has good aging resistance in various environments.

7. Corrosion resistance: this coil has good resistance to acid, alkali, chemical corrosion, and has good aging resistance in various environments.

• Matters needing attention:

  Do not expose non-exposed materials to the exposed environment.

  Do not place the frozen base on the sticky roll.

  Cannot be constructed on the base of pollution and high moisture content.

  The paper can only be removed before and after the pasting.

  Tighten the container tightly when the sealant is not used up.

  Other manufacturers' supporting materials, do not apply to this product without verification.

• Storage pre-transport: 

• Materials should be stored in dry, ventilated environment to prevent sun and rain. Different types, specifications of the coil should be stacked separately.

   

  The coil should be laid flat, with no more than 5 storeys.

   

  Under normal conditions, the storage date is one year (from the date of production).

   

  The coil should be flat when transported, not inclined or crossed, horizontal pressure.

   

  Purpose features:

   

  This product is widely used in various environment or surface water plugging, also can be used in pipeline corrosion protection. The surface is made of real aluminum foil coated with BOB and modified asphalt. Good asphalt duct temperature is not easy to flow away, but the wet all the substrate paste. But it's not sticky with the layer below. Paste in every 2 minutes after cleaning of surfaces can be fixed to away without heating, true aluminum foil is used on the surface of the waterproof, fire prevention, anti-corrosion is widely used in places around the world need to bare. As a result of the surface aluminum foil anticorrosive properties are often used in underground pipeline corrosion prevention first with a layer of asphalt tape on the pipe and then covered with PVC duct tape on the asphalt duct tape.

•