Model no. : 196

[size] : 9cm(length)*2.8cm (width)* 2.5cm (height)

[net weight] : 30g

Bulb: COB LED

[battery] : 1*AAA battery

Material: ABS plastic

[switch] : press the switch

[tap position] : 3 COB strong light -COB weak light -COB flash

[color] : blue/black /

Factory direct sale    The good faith management 
     Large quantity can be customized. Can be printed LOGO 

The price is for reference only. For details, please consult the store. Thank you

1. Instructions

1. Check the battery: make sure the battery is energized and load the flashlight in the correct direction;

2. When using the flashlight, choose according to the requirements of the torch on voltage and battery, and do not use it randomly to prevent the circuit board from burning out. Do not use the battery of different types and voltages at the same time.

3. In use, turn off the flashlight when the brightness of the flashlight significantly changes, so as to prevent overdischarge of battery power and charge it timely; Note that the battery is waterproof, moisture-proof and anti-fall. Charge according to the charging speed of the charger when charging.

4. If the battery is not used for a long time, the battery shall be filled up and stored, and the battery shall be charged and discharged again in about three months in a normal way to avoid chemical corrosion;

5. Keep the inner wall of the lamp cup clean, never wipe with hand or hard objects, remove the fingerprint on the lens, and gently wipe with a cotton swab dipped in the lens cleaner;

6. Do not contact the flashlight with sunlight, water, chemicals and corrosive gases for a long time to avoid damaging the flashlight;

7. Non-professionals should not disassemble the flashlight to avoid damaging the circuit board.

Ii. Matters needing attention

1. Do not direct the light to the eyes to avoid causing harm to the eyes;

2. Do not use over voltage, and the voltage should not exceed 4.2v. Do not reverse the battery, or it will burn the circuit board.

3. When charging, please check the positive and negative terminals of the charger. Do not overcharge the battery to avoid damaging the service life of the battery (the charging time is generally 5-8 hours).

4. When using the torch, check that all threads are tight and not loose, otherwise, the goods may be slightly bright.

5. The flashlight should avoid being placed in the sunlight or high temperature environment. After disuse, please take out the battery and store it in a cool and dry place after it is fully charged.

6. The flashlight has the water-proofing ability for daily life. Generally, rain shower won't cause problems, but it doesn't have the diving function.

7. To keep the o-ring (seal rubber ring) and thread spinning smoothly, please wipe the surface of the o-ring (seal rubber ring) with petroleum jelly 2-3 times a year, etc.

Iii. Charging instructions

     Insufficient should be timely added, so as not to affect the battery life, the battery should also be charged during long storage.      

 Jun strong - hand electric manufacturers direct - selling integrity management The main:Strong flashlight, headlamp,carThe lamp,Diving lamp, lighting jade special and other high - grade aluminum flashlight and stainless steel flashlight. Companies adhering to the\"The customer is supreme, into thetake\"Adhere to the business philosophy\"The guestThe first family\"With good quality,Reasonable price for the majority of customers to provide quality services, welcome new and old customers patronage!

contact:

Jun strong electricity The cloud electronic

Phone: (0)13566558058  WuQingYun

         (0)18857982250  TaoXiaoJuan

Company homepage:http://ywyunmai.1688.com/