The function of steering wheel covers

 

According to the investigation, a very small number of drivers are aware that the steering wheel has a shock-absorbing effect. Due to the steering wheel itself being too hard, there is no good way to deal with unexpected rough roads. Each time a driver holds the steering wheel, it will vibrate violently, thereby stimulating the heart.
In addition, steering wheel covers, which serve to protect the steering wheel, are easy to disassemble and clean, which will help improve the health and living standards of the car. Throughout the driving of the car, contact between the hands and the steering wheel is naturally frequent, resulting in a lot of dirt and the breeding of many bacteria. According to the unofficial statistics of the health department, millions of bacteria are adhering to the steering wheel. If you want to remove these bacteria, you usually need to use high-temperature disinfection or ultraviolet disinfection, and general wet cloth cleaning is not a fundamental role. However, from the pain of the steering wheel fixed to the vehicle, the inconvenience of disinfection. The mobility of the steering wheel cover is easier for the owner to carry out daily cleaning.
Pay attention to the health of car life, use high-quality car steering wheel covers, and you can not only see the decorative function of the product, but also improve the use of the steering wheel cover. Now, with the improvement of market segmentation and consumer demand, the steering wheel cover has become an independent industry. Continuous improvement in design and production technology makes the product more attractive and more humanized.

【Installation Method】

1. Place the upper end of the steering wheel cover on the top of the steering wheel, press the upper part of the steering wheel, and tighten it step by step with both hands towards any side of the steering wheel.
2. When the steering wheel cover is difficult to fix, please have another person pull it down to the appropriate position.
3. After the installation of the steering wheel bottom is completed, it should be in a firm and non-slip suitable state, and after slight adjustment, the installation is complete.