Packing: color box

Using the installation method:

1. After receiving the goods, open the plastic bag, first remove the two black rubber sealing ring, a four minutes, a six large, according to the size of his faucet can first try rubber seal the first set of the tap, can set into, and relatively tight, choose which a can be used.

. remove the water pipes, with a choice of spring of the joint, the green plastic cap is unscrewed, the selected rubber sealing ring and put it, the green plastic cover is screwed back tightly.

3. Remove the gun head and the sealing rings are arranged in the water inlet base of the gun head, the pipe thread connector is screwed into the water inlet of the gun head, screw, so water gun connected.

4. The spring with the end joint directly on the faucet, pay attention to, tap sets hands must be held in green plastic cover near, don't squeeze in the following joint to prevent set of taps is encountered relatively tight, twisting around, plastic joint was broken.

5. Water first all straightened, do not fold in there, open faucet, began to open a small, water, check the joints have no leakage, if have to adjust, no, water bloom, you can normally use!

6 adjusting water, can adjust the nut on the head of the gun, spray to the water column, can be adjusted!

Note: the gun body for aluminum material, the gun head, the core for electroplating copper pipe, rubber tube covered with one layer of woven silk decorative. The water gun pressurized function only, most sleep on your water pressure, the more pressure the better, not to professional car wash pressure ratio, that is through high-pressure pump pressurizes, FABI.