Warm instructions:

     Yiwu xufan adhesive products co., LTDProduced by our companyThe b-7000's are mainly high-end exports,Production quality is also very strict, not the market goods, dear friends please recognize the brand, thank you!

commitment:Where in theXu sail adhesiveLimited company wholesale agent B-7000 rubber under the same quality priceGeorgia national advantage

Of the goods:B7000 comes with a needle

Technical data of B7000

Appearance: transparent semi - fluid body

Solid content: 28%-35%

Hardness after curing: 65-80a

Surface drying time: 3-6 minutes or so

Full curing time: 24-48 hours

Gum: fully transparent soft rubber semiconductor

Characteristics: no white, no crisp, no yellow, no hard smell is very small

Save: store at 10 to 30 degrees

Concentration is： 

B - 6000 (6000 CPS)

B - 7000 (7000 CPS) 

E 8000 (2500CPS)

use:

B7000Adhesive can paste more materials, it on metal, glass, ceramics, stone, bamboo wood, cloth, leather,PE,PP,PVC,ABS., nylon, sponge, film, fabric, electronic components, plastic, rubber, fiber, paper,Mobile phone frame, LCD screen, frame, frame, bracket, etc.

B-7000 from 110ml needle package: 12 PCS/box, 10 boxes, 120 PCS/box

B-7000 from the needle 50ml packaging: 15 PCS/box, 24 boxes, 360 PCS/box

B-7000 from the needle 25ml packaging: 50 PCS/box, 16 boxes, 800 PCS/box

B-7000 from the needle 15ml packaging: 100 PCS/box, 12 boxes, 1200 PCS/box

B - 7000.Extremely fine from the needle 10mlpackaging: 1 piece/box, 500 pieces/box, imported raw materials

B-7000 from the needle 3ml packaging: 200 PCS/box, 12 boxes, 2400 PCS/box

About 16 gramsThe dimensions are approximately 107 by 30 mm long by wide

capacity: 15 ml

Gum: fully transparent, soft gum, semisolid

Features:No white, no crisp, no yellow, no hard, ultra-low drawing, no smell.

 ,

 

 

 

Usage:

1. Please read the product description carefully before use

2. Before large area use, please do small area experiment first

3. Please ensure the surface of the adhesive is clean and dry

4. The operating temperature should be between 18 and 32 degrees

5. After opening the cover of the product, please remove the residual glue on the cover pin in time for closing the cover

6, wait 2 to 3 minutes, the two adhesive on the adhesive slightly pressure

7. Put it straight for several hours, and reach the adhesive strength after 24-48 hours

8. When the product is not in use, put the cap on the bottle to prevent the glue liquid from curing after contacting the air

Production equipment:

[matters needing attention]

May irritate skin and eyes

2. Please use it in a well-ventilated environment

3. In case of contact with eyes, rinse with plenty of water

4. Keep away from children's storage, and keep away from fire during production

5. The warranty period is 18 months, and the safe use date is shown in the end of the product tube