[name] washing pipe set

The use ofinstallation method:

Open packaging1. items received,first remove the two black rubber sealing ring, a four minutes, a six large, according to the size of his faucet, can put rubber sealing ring to set a try faucets, requirements can be set to go, and relatively tight, choose which one can use.

2. out pipe, chose to take the spring of the joint, the green plastic cap is unscrewed, the selected rubber sealing ring and put it, the green plastic cover is screwed back tightly.

3. out gun head, the sealing rings are arranged in the water inlet base of the gun head, the pipe thread connector is screwed into the water inlet of the gun head, screw, so water gun connected.

4. the spring with the end joint, directly on the faucet, pay attention to, tap sets hands must be held in green plastic cover near, don't squeeze in the joint below, to prevent the set of taps is encountered relatively tight, the left and the right twisting, plastic joint is broken.

Water. First all straightened, do not fold in there, open faucet, began to open a small, such as water, check the joints have no leakage, if re adjust, no, water bloom, you can normally use!

6. regulation of water samples, you can adjust the nuts on the gun head, splash into the water column and can be adjusted.