Wear goggles

Press the goggles against your face to your eyes to enhance the effect. For example, the goggles can be close to the face in a short time, indicating that the product is suitable for wearers.

Nose adjustment (if applicable)

Properly adjusted nose mask can make wearing comfortable, and give full play to the waterproof function of goggles. For waterproofing, compare lenses one by one until tightness is adequate.

Adjust the headband

The headband holds the goggles in place.

The headband is not necessarily the tighter the better, too tight will leave red marks around the eyes. Adjust the headband until the wearer feels comfortable.

Wearing a step

Put the goggles on your face, adjust them, and pull the strap over your head. The headband should be at a 45 degree Angle to the head to prevent water infiltration. If water seepage continues, repeat the adjustment of the headband.

Matters needing attention

Take special care when adjusting and removing goggles (especially when wet)

If there is a cut on the skin, do not use goggles.

Discontinue use immediately if you feel unwell or have inflammation. 

Do not wear goggles to dive without proper guidance.

Do not wear goggles to dive at a depth of two metres or less.

Do not pull the goggles out of your face. This may cause them to bounce back and cause eye injuries.

Maintenance notes:

When using, wet the inner fog-proof surface with water to get the best fog-proof effect.

Do not use your hands or rough objects to wipe the anti-fog surface, so as not to scratch and affect the anti-fog effect.
To ensure the anti-fog effect, please rinse with water and air dry after use, put the lens box in a dark place for collection.
Avoid exposing goggles to high temperatures or the sun.