Rolling machine is producedProduct features:
1. Oven material: stainless steel wire drawing board, high temperature resistant, easy to clean, longer life, and green environmental protection material, will not cause harm to the human body.

2. Heating device: Adopts stainless steel energy-saving electric heat pipe, which is energy-saving and efficient.

3. Intelligent control: The temperature and time of the machine as well as the rotation system adopt the coherent intelligent control mode, which makes the operator more relaxed.

   Welcome new and old customers to dial the free hotline consultation.

 Better quality, better service, please consult +86 18257926263 for details   + 86 579 98355500 

Western restaurant, bakery, cake room, hotel

 It is used in bakery, western restaurant and bakery to make all kinds of bread

1. Installation and commissioning shall be carried out by professionals with formal qualified electrician certificates issued by relevant competent departments.

2. Check whether the voltage of power supply is consistent with the nameplate of the machine. Whether the wiring parts are strong, whether the safety grounding wire is strong. (The power cord of the oven should be connected to a special socket with anti-leakage and overload protection.)

3. Do not pull the wire forcefully to prevent the power line from falling off and causing leakage accidents. 

4. During the operation, the operator shall take appropriate protective measures when taking and putting the pastry to avoid burns or scalds.

5. Each layer of the oven is equipped with a temperature limiter. When the temperature limit is reached, the power supply of the heating tube in the oven will be cut off in time to prevent the equipment from burning out due to high temperature. The main output end of the time-limit thermometer is disconnected for a long time, and the oven stops heating. A power off process must be performed before the main output end can be connected and the oven can work normally.

6. The workplace should be kept dry and ventilated. The oven is not suitable to be directly exposed to sunlight and placed in wet or corrosive articles and gases should not be piled up in the vicinity of the oven flammable articles.

7. The oven should be placed more than 20CM away from the back wall to ensure the smooth flow of the air outlet. The environmental temperature requirements are as follows: -10~40℃, and the relative humidity is not high, 85℃.

8, in the process of transportation, the oven should be carefully put, prevent violent vibration, not upside down. Packaged ovens should not be stored in open air for a long period of time. They should be stored in a warehouse with a relative temperature of no more than 85%, with good ventilation and without corrosive gases. When temporary open storage is needed, rain prevention and corresponding protection measures should be taken.

                 Phone: 18072684810

Email:avelyn.cai@hotmail.com

SKYPE:avelyn.cai.hotmail.com

Web site:www.dreamdar.cn