Glass adhesive is a versatile, low cost, durable and neutral adhesive used as a general building material for glass seals.

Applicable materials: doors and Windows,

Glass, aluminum alloy, painted surface, ceramic, glass fiber, non - oily wood, etc. Powder spray aluminum alloy must be thoroughly removed by solvent wax coating, the use of the product effect depends on the specific substrate and use method.

Usage restrictions:

Masonry; Cement, aquarium, zinc, copper, aluminum and structural glass assembly; Completely immersed in water; Use paint assembly on sealant; Structural assembly using construction grade sealant.

Description:

1. Use clean and dry surface (solvent available). Remove any impurities or sealant residue. Clean with solvent. When using flammable solvents, please pay attention to the service life.

2. Cover adjacent surfaces with masking tape for later finishing and cleaning.

3. Cut the nozzle into the required size and connect it to the rubber hose. The sealant should be in good contact with both sides of the interface to ensure that the sealant can fully fill the interface.

4. Tear off the tape before the sealant solidifies.

5..Uncured sealant can be removed with cloth and solvent such as turpentine. Excess curing glue can be removed with a scraper.

Precautions for use:

Direct contact with uncured sealant will irritate the skin and eyes. Excessive exposure to gases emitted during curing can irritate the eyes, nose, and throat. Avoid contact with skin and eyes. Avoid excessive inhalation of exhaust gas during curing. Use in a well-ventilated area. Use suitable gloves.

Emergency response:

Once contact with eyes or skin, rinse immediately with water for 15 minutes. If adverse reactions worsen, seek immediate medical attention to sealant during cure to develop acetic acid (odor with vinegar). Fully cured sealant is not dangerous.

Avoid contact with children!

Before use, please read the product and material safety data sheet for detailed use and health and safety instructions.

Storage:

Store in a dry place. Storage temperature should be below 30℃ to extend the effective life of the product.