The opposite side of each gridThe apertureGenerally 6.5cm-14cm. The thickness of the wire used generally ranges from 3.5mm to 6mm. The material of iron wire is generally Q235 low carbon iron wire. The wire is welded through rolling and becomes a black mesh sheet. The general dimensions of the mesh are 1.5 m X4 m, 2 m X4 m, 2 m X3 m.
General surface treatment for cold (electric) galvanized treatment. Also have hot dip galvanized, dip, spray. But overall, 99 percent of them are cold (electric) galvanized. Meigernet has the following points to pay attention to
1.The wire diameter
The smaller the mesh hole of the mesh, the finer the silk, the larger the mesh, the thicker the silk. For example, the mesh aperture of 6.5cm requires the iron diameter of 3.5mm-4mm. Again fine a welding namely break, again thick too heavy, worker cannot bear.
2. Overall size
The outside dimension width of meigernet does not exceed 2 meters commonly. The length is generally not more than 4m. More than 2 meters is laborious workers, two is not good galvanized. It can be as long as 6 meters, but not more than 6 meters. Generally more than 4 meters after the price will increase significantly.
3. Solders are soldered firmly.
Meige mesh welding, generally relatively strong welding, but if the workers are novice, the adjustment of the machine is not high technology, will appear to open the welding situation. Once this situation occurs, it will certainly bring heavy losses to customers and factories.
4.galvanizedprocess
Galvanized is easy to go wrong with the link, workers are a lot of irresponsible, the boss is not careful, workers may soon shorten the galvanized time, cause zinc. The result will also be heavy losses for factories and dealers.

High qualityLow carbonSteel wire.