Product description:
Sealant, the introduction of advanced production technology from the preparation. Single component, high sealing strength, high temperature resistance, long lasting weather resistance, no sagging of facade coating, good oil resistance, no corrosion, no irritant gas, no shrinkage of solidified products, colloids are easy to peel, environmental protection and non-toxic. Not limited by the size and shape of the bonding surface. Can replace all kinds of rubber pad, asbestos pad, cork pad and paper pad, can effectively prevent water, oil, air leakage, with good sealing and leakproof effect.
Application:
This adhesive can replace all kinds of rubber pad, asbestos pad, cork pad and paper pad, and can effectively prevent water, oil and air leakage, with good sealing effect. It is suitable for the plane sealing of engine, gearbox, oil tank, electromechanical equipment, electric appliance, instrument, electronic and chemical equipment of machinery, automobile, motorcycle, tractor and ship.
Instructions:
1. Clean moisture, dust, oil, rust and other dirt on the surface of the adhesive;
2. Pierce the nozzle with the cap, apply the gel evenly from the outer edge to the inner edge about 1.6-3.2 mm thick, with good sealing degree;
3. After gluing for about 10-20 minutes, when reaction occurs on the surface of the film, align and laminate the two sealing surfaces and press them to tighten;
4. It can be used for 10 hours or 24 hours at 25 ° c at room temperature, with excellent sealing effect;
5. Cover the unused gel after use. Wash your hands with water after operation and clean the tools. Precautions: 1. Keep the workplace ventilated and avoid contact with children;
2. Wear leather gloves during operation. If the skin or eyes are touched, clean them with water or seek medical advice immediately.
3. Store in a cool, dry and ventilated place away from high temperature;
4. Please do experiments before batch use to avoid improper operation affecting the bonding effect.
