Pieces pieces pieces in piecesThe product,Pieces pieces pieces in pieces

















     The reverse and reverse switch of 220v motor adopts 10A relay. Can match multiple remote control, simple operation. Mainly used in all kinds of motor positive and negative rotation control, shutter door control, garage door control, expansion door, electric curtain, lifting equipment, road brake, lift, industrial control and other fields.This controller adopts microcontroller chip of American microchip company. Receive the smokeTemperature sensing signal is controlled by three program methods of A.B.C to realize smoke. All kinds of time are intelligent adjustment of microcomputer learning mode; It is suitable for AC380V50HZ or AC220V50HZ shutter door machine.

Main features:
1, microcomputer control: intelligent chip control, load protection circuit
2, remote control function: the use of radio remote control door body open, stop, close
3. Infrared anti-collision function: if there is an obstacle when the door is closed,
The door body stops and retreats automatically.
4. Open and close automatic limit function (single limit or double limit is optional).

5. Standard matching: one set of switches is one controller and two remotes, and multiple remotes can be matched according to customers' needs.

Ii. Main technical parameters:

Input voltage: 220V (1±10%) V
Rated current per channel: 10A
Remote control: radio coding
Operating temperature: -25℃ ~ +50℃

Modulation: ASK

Receiving sensitivity: -105dbm
Main power supply: AC 380V(± 15%) 50Hz(± 1%)

Standby power supply: DC24V/2Ah

Motor power: < 1.0 KW

Feedback contact capacity: DC24V/1A

Dimensions: length x width x height 335mm x 245mm x 60mm

3. (1) basic functions:
(1) manual control shutter door up, down, stop function
(2) receive smoke temperature sensing signal automatic control to complete a slide, intermediate stay and secondary slide function
(3) receive the fire center signal automatic control to complete a slide, intermediate stay and secondary slide function
(4) fire alarm state: rolling door after the end of the operation by any key are to rise to the middle of the delay after the second drop in the end
(5) gate indicating output (upper, middle, lower)
 The auxiliary functions:
(1) power, phase sequence operation error state, light flashing indicator function
(2) sound and light alarm function
Protection function:
(1) the power supply into the line phase sequence automatic detection and phase sequence change after the automatic protection function
(2) overload automatic protection function
(3) missing phase automatic protection function

Four. Wiring method:

The receiver comes out with six wires, two of which are 220V ac voltage wires, namely the power supply for household use.
2, 2 is the rise and fall control line, 1 is the common line, 1 is the stop line, the color of the line, you can refer to the circuit diagram. As long as the power line is not connected wrong, the four lines can be connected casually, and there will not be any danger or damage if the connection is wrong, so in case the interface is not consistent, you can rest assured to try;
3. Press the remote control, close to the receiver, and you can hear the sound of the motor relay working;
4. Press the remote control once, and the remote control will send a signal to the motor (note the signal, not the power supply), and then the motor end will lock the signal and continue to operate until the limit switch of the motor is activated or the stop button is pressed.

                         Installation in no sunlight, high temperature, serious dust, dripping, moisture low, corrosive gas place

     Welcome to fortune and technology store, thank you for your support and evaluation, we will be superior quality, satisfactory service for the purpose, let you shopping more assured, more secure, more intimate!

                         In pieces in pieces24-hour hotline: 13174962567 for your service!In pieces in pieces