USB mini pocket creative air conditioning fan plug-in model, can be installed on the battery

Article no. : my-06496
Weight: 397 grams

Package size: 14*6.5*21.8cm

Actual product size 5 * 9.5 * 17.5 cm

Material: ABS+ electronic components

Packing quantity: 42pcs

Packing specification: 47*39*44cm

Gross weight: 17.52 kg

Handheld mini snowman air conditioning fan Good workmanship,  The wind is strong , surface shell is not easy to scratch, sponge good water absorption. ABS material production, surface shell is not easy to scratch

Equipped with 1 USB cable + 1 water charger

In the middle of the summer, it is a kind of torture to go out in the heat wave. Sneaking into the mall to talk about air conditioning is a good way to escape the heat. But you can't stay in one place, can you? Go out, still is the sweat wet world.
Not afraid, now with this handheld mini air conditioning, heat billow on the street, in the crowd, you can have cool and refreshing!
Yes effective water evaporative cooling technique, need to add water to activate the cooling function, only use 4 AA batteries, can easily enjoy this little guy wet cold wind blow out, z place for it, or outdoor activities, whether it's movement intermittent rest time, concert or crowded, people, more air hot again, your hand heart, always have cool source of non-stop! For a long time in front of the computer, whether you are tempted by it?
The product itself comes with a 60ml water bottle, a USB cable to the computer, and a water-cooled sponge
Use method is very convenient: as long as the product comes with the water in the drop bottle evenly drops on the sponge and connected to the power supply, it can work!

3. Matters needing attention
A: the product is not waterproof. You should take out the sponge when adding water and then add water. Do not inject water directly to prevent water from entering the machine and causing damage
B: the humidity of the sponge is subject to filling without dripping. If soaked too much water can be wrung out and then put into the machine
C: the product is not resistant to falling from high altitude. Please pay attention when using it
D: it is recommended to dry the sponge after each use to avoid bacteria and odor.
Tip: if you need the cool air to smell, drop a few drops of the essential oil into a sponge. Of course, after use, remember to soak in water to wash and dry again!
Battery installation
The battery cell is located on the handle, next to the band
1) slide down and remove the lid of the battery compartment
2) install 4 new AA alkaline batteries
3) replace the lid on the battery compartment
4) please take out the battery when it is not used for a long time
The DC socket of the external power supply device is located at the upper interface of the handband
1) insert the DC plug of the alternative power supply device we configured into the socket
2) connect to the home power supply and you can use the portable cooling when there is no battery
Installation of water - cooled sponge
1) turn off the machine
2) remove the sponge cover with the water-cooled sponge by pushing the top lever out
3) first use: soak the water-cooled sponge in tap water and rub it with soap. Please be careful with the sponge and don't wash it too hard.
4) if there is any water left over from last use on the sea surface, please remove the sponge from the lid and squeeze out the remaining water.
Fill the bottle with tap water, distilled water or mineral water, then pour 30ML of water evenly and slowly over the sponge surface.
6) first insert the point jack, reinstall the sponge lid together with the sponge, and then push the lid towards the host to lock it.
Note: do not oversoak the water-cooled sponge. Don't sponge under running tap water. It is difficult to master the 30ML of water used for soaking. Always use the bottle.
Note: the machine is not waterproof, please avoid external contact with other water.
Note: if water leaks during operation, you may be pouring too much water into the sponge (see step 5). Or maybe you didn't squeeze out the remaining water before you soaked the sponge.
operation
There are two switches above the cover of the main battery cell:
1) the snowflake switch can control the power of the machine and the air speed of the air cooler
2) turn on the machine

3) rotate the air tube to adjust the air output direction, so as to bring you better cooling
4) when the cold air decreases, please soak the sponge again. Remove the sponge lid and touch the sponge to make sure it is dry. Usage time varies depending on usage and environment (approximately half an hour to 3 hours)
5) regularly touch the sponge to make sure it is still wet, and if it dries, resoak the sponge
Note: to effectively produce cold air, the sponge must be wet. If not, follow the installation instructions for the water-cooled sponge.
Maintain water-cooled sponge
After each operation, remove the sponge lid according to the instructions, squeeze out excess water from the sponge, and dry the sponge in the air.
For best results, clean your water - cooled sponge regularly and soak it before use.
Note: make sure your hands are clean when handling sponges
aroma
For a slight scent, you can use your own aromatic essential oil on a water-cooled surface. After soaking the sponge (see instructions for installation of water-cooled sponge), put a few drops of the essential oil on the surface of the sponge and wash it after use.
Don't mix scents on the same sponge.