Mesh side block and rear gear are divided into two types: punching without punching, at present, both side clamps, if you need to punch, book in advance.

If the side block is punched, each one is equipped with a suction cup, the one without punching is equipped with two suction cups, the two suction cups punched in the rear gear, and the four suction cups without punching. The cost is the same.

Mesh side block (2pcs) packing: 300 pairs/carton outer box size: 55*45 * 55cm single set about 55g

mesh rear block (1pcs) packing: 200PCs/carton outer box size: 62*32 * 51cm a single set of about 100g

5-piece mesh packing box: 100 sets/box outer box size: 55*55 * 50cm a single set of about 200g

[Color]]: as

[Size]]:1000mm X 500mm

[Material]]: mesh + wire outer ring

[Packing]]: PVC BAG

[Description]]:   mesh behind
1. The summer light makes the room temperature in the parked car rise sharply, like a hot steamer, which is almost unbearable!
2. The mesh side rail is double installed and placed on both sides of the glass at any time to effectively reflect and isolate the conduction of heat energy and reduce the temperature inside the car.

3. The product is attached with PVC suction disc firmly attached to the inside of the glass, making it no longer hot this summer.

Instructions for use:
1. The outer ring of the product is covered with elastic steel wire, which can ensure the free folding and expansion of the product. Please unfold it slowly when unpacking and opening the product. Do not let it pop up naturally, so as not to fly the suction cup. If the button is deformed, Please soak it in hot water for a period of time!
2. High temperature or long-term adsorption in summer. If the suction cup falls off, please apply water slightly to the suction cup to reinforce the adsorption fastness.
3. When rolling down the window, please remove this product first to avoid clamping into the window.

.

It can be directly absorbed to the window by the side block of the suction cup bar, which can be used when driving. The car is isolated from the hot sunlight, and can effectively reduce the aging of the Interior caused by too much direct sunlight. Easy to install and easy to pick. Fix the side windshield with the attached suction cup. If the sucker is deformed due to packaging, you can put it in boiling water for under pressing to restore it to its original state.

[Product description]]

1. The summer light makes the room temperature in the parked car rise sharply, like a hot steamer, which is almost unbearable!

2. The mesh insulation rear gear is placed inside the glass at any time to effectively reflect and isolate the conduction of heat energy and reduce the temperature inside the car.

3. The product is attached with PVC suction disc firmly attached to the inside of the glass, making it no longer hot this summer.

"Instructions for Use]

1. The outer ring of the product is covered with elastic steel wire, which can ensure the free folding and expansion of the product. Please unfold it slowly when unpacking and opening the product. Do not let it pop up naturally, so as not to fly the suction cup.

2. High temperature or long-term adsorption in summer. If the suction cup falls off, please apply water slightly to the suction cup to reinforce the adsorption fastness.

Black mesh fabric sun block five pieces set

this sand sunshade for car glass is suitable for various models, which can help your car isolate more than 90% of the sunshine; The installation is very fast, as long as you gently pull up the pull ring buckle on the suction cup when parking, two seconds, cool summer! It does not hurt the car body, beautiful and practical, and the price is cheap. It is an essential product for you to drive out in summer!

[Product name]: black mesh fabric sun block five-piece set

[Product includes]: rear block* 1 a; simulation* 4 a; Suction cup10 a; Storage bag* 1 a;

[Product color]: As shown in the figure

[Product size]: rear block50 * 100cm; simulation36 * 44cm;

[Product material]]: mesh

[Product Net weight]: 185g

[Product packaging]: 1SET/storage bag

[Number of boxes]: 100pcs/ctn

[Applicable model]: Universal

[Product features]]:

1. Sun shading, snow blocking, frost prevention, leaf protection, bird droppings prevention, etc.

2. ※ car front window and rear window are applicable. ※ Can reflect sunlight rays. ※ It can effectively reduce the temperature inside the car. It is equipped with two suction cups, which are adsorbed on the car glass. It is very convenient to use and remove, and the front and rear glass are universal.

[Tips]]:

1. The suction cup will be deformed due to extrusion during transportation. Soak the suction cup in boiling water for a while to restore its original shape. 2. Apply some water on the suction cup, the suction cup will be better!

[Name] car front window sunshade

"Product Description]
this exquisite foldable car sunscreen film is made of high-quality silver-white reflective metal film, which is very light. Foldable design, only more than ten centimeters wide (60 centimeters long) when folded, can be placed in the car at will. When fully opened, the area is 130*60cm, and there are two suction cups on it, which can be easily fixed on the front and rear windshield of the car.

[Use]]
car owners must have deep feelings about the uncomfortable taste of the car like an oven if they want to put it in exposed place in the hot summer. But with it, this hot discomfort can be greatly reduced. Because it is absorbed on the glass, or more simply placed directly under the windshield, it can reflect the sunlight and heat emitted from the front and rear windshield out of the car, thus, the temperature inside the car decreases greatly. At the same time, the accessories in the car can avoid the problem of aging and fading due to sun exposure.

Because it is foldable, it can be used in almost all cars. It's really a must-have accessory for car owners! In addition, because it is attached with two suction cups, it can also be used for glass sunshade in other occasions (such as houses, etc.).! For the use of suction cup, because it is easy to deform during transportation, Please soak it in warm water and use it normally after restoring its properties. If you feel that the suction cup cannot absorb glass, please stick some water and continue to use it, so it is very reliable.