For those who are exported to neon countries, it is required that the light should not be on within three thousand points. The electronic category is very stable. All of them have been tested. For 7 days, anti-corrosion, anti-salt spray, anti-rust, etc, I was tortured by the contact problem of 4s with lights, so I have to do such a high lighting rate. The style is simple and practical, and it is very modern. The brightness of the lights is bright in all the ashtray with lights, more than 1204 of SW, the only weakness is that the tinplate can cannot be pinched hard, and it is easy to be recessed, but it can still be pressed back when it reaches inside. I know it after eating the canned fruit, and there is no way to be thick, this material is decided. It is recommend

high brightness LED ashtray www.zestcar.com

[Size]]:123mm * 65mm * 65mm

[Material]]: tin cans + flame retardant ABS

[Packing]]: color box

[Description]]:  
     the shape of the cylinder and the special design of aluminum honeycomb transparent hole reflect the modern flavor of the product.
    The lights on the inside of the cover can be easily used at night, and the outside can release light blue light to the car.
    Simple cigarette end pinch-out design, there are two pinch-out holes in total.
    Ashtray can be easily taken out for easy cleaning.
    Ashtray materials are made of high-density fire-proof engineering plastics, which are not flammable.
    Can be placed in the outlet beverage rack or on the car beverage seat.
    CR2016 Battery has long service life and easy replacement.

Product installation and usage:
    1. This product can be installed with the beverage rack of round air outlet, and can be used only by placing it on the installed beverage rack or the beverage seat on the car.
   2. When using, when the lid is turned on to about 90 °, the light will be turned on automatically. If no light is needed, just flip the lid to 70 °.
   3. If you need to clean up the ash, you only need to separate the cigarette holder from the barrel body, and then you can clean the ash at the bottom.
   4. If you need to replace the battery, pull the battery box down, then separate the box, change the CR2016 button-shaped battery in the positive and negative direction, and then close and install it back to the original place.
   5. When the light mirror needs to be wiped with dry cloth, keep it clean, otherwise it will affect the lighting effect