Default: monolithic price 30 * 5cm red 15 * 5cm White 15 * 5cm

need to roll please note, and the entire volume price 95

standard: in line with the Ministry of Public Security standard GA 406-2002; GB 7258-2004
certification: by the Chinese state mandatory 3C certification code: C000368

transparent body reflective logo has the excellent advantages:
◇ wear-resistant, scratch resistance, impact resistance, resistance to rinse, gasoline, diesel and other solvent.
◇ products with superior reflective properties of the good of the wide-angle performance.
◇ has good flexibility, the construction is simple and convenient.
◇ unique design of the adhesive-backed with high strength, low temperature resistant, non-corrosive paint and reapplying the characteristics.
◇ weather resistance is good, at-40 ℃ to 70 ℃ conditions do things the same way you do, service life period of not less than seven years
◇ brands around the traffic police awareness is high.

  The process of national standards "of vehicle driving safety technical conditions" (GB7258-2004) III amendments first 8.2.7:

all trucks (including Tricar, low-speed and zai huo lei chassis modification of special vehicles) and towed vehicles should be in the rear, sides of the body reflective logo, the rear of the body reflective logo should reflect the rear part of the height and width of the side of the body reflective logo length should not be less than the conductor 50% of the Tricar side of the body reflective logo length shall not be less than 1.2m, the cargo compartment length is less than the conductor 50% of the truck side of the body reflective logo length should be the cargo compartment length. The van-body truck and trailer van rear, sides of the body reflective logo should reflect the cargo compartment profile.

H.1 paste Basic requirements

H.1.1 paste construction requirements

the body reflective logo shall paste in an unobstructed, visible, smooth, continuous and free of dust, anhydrous stains, no oil, no rust, no lacquer become warped body surface.

Before the paste should be paste the dust on the surface of the wiping. A grease, stains part of application a soft cloth dipped in degreasing solvent or detergent clear after drying paste. For paint has soft, powder, rust or become warped site should be removed paint with sandpaper on the parts of the grinding and do antirust processing, and then pasted body reflective logo.

H.1.2 universal paste requirements

the vehicle body rear of the body reflective logo shall consist of white cells, white cells end. Side may be composed of red cell, but close to the rear of the vehicle at the end of a unit shall be white unit.

Paste body reflective logo, shall not affect the standard of the vehicle lighting and light signalling devices for motor vehicles and performance.

Paste body reflective logo, should not be in the body reflective logo on the drilling and the slotting.

The body surface cannot be directly pasted body reflective sign, logos, should be applied to the body reflective sign recognition paste having a certain rigidity, strength, anti-aging of the strip-shaped liner on, the strip liner firmly attached to or riveted to the body.

The body reflective logo from the ground height minimum 380mm.

H.1.3 rear body reflective logo

first of all, the rear of the body reflective logo should, as much as is possible, be reflected in the rear of the vehicle width and height level paste of the body reflective logo reflect the rear of the vehicle width, along the sides of the rear edge of the vertical paste of the body reflective logo reflect the rear of the vehicle height of the cargo compartment rear corner intersection part shall be white unit. Tricar, low-speed, mini-truck and part of the light-duty truck due to the rear compartment structure can not meet the white cells intersecting requirements is red, white, but vertical paste of unit upper shall be white unit. The van-body truck and trailer van the rear of the body reflective logo should reflect the cargo compartment profile.

Secondly, different levels of the body reflective logo material shall not meet simultaneously and applied to the rear of the vehicle using first body reflective logo on the material with the back reflector of the area of the should be less than 0.1 m2; when the reflective identification material of the second-class vehicle body is adopted, the sum of its area with the rear reflector shall not be less than 0.2 m2.

Finally, the rear of the body reflective logo should be continuously paste, it is not possible to separate the code that continuous paste can be intermittent paste, but each successive length should not be less than a 300-mm and shall include red, white body reflective logo on the at least one unit paste spacing shall not be greater than 100mm. Under special circumstances, red and white units are allowed to be pasted separately, but red and white should be kept. The length of each continuous segment should not be less than 150mm, and the pasting interval should not be more than 100mm. If not along cabin sides of the rear edge of the vertical paste, can be in the most close to the edge of the widths up to 50mm of stick-on surface paste body reflective logo on the upper edge of the as close as possible to the cabin rear portion of the upper edge.

H.1.4 side body reflective logo

the sticking of the reflective logo of the side body is allowed to be interrupted, but its total length (excluding the interval part) should not be less than 50% of the vehicle length, and the length of each continuous section should not be less than 300mm, and should include red, white car body reflective logo at least one unit, the second-level car body reflective logo material paste interval should not be greater than 150mm, the first-level car body reflective logo material paste interval should not be greater than 300mm, paste should be as far as possible longitudinal uniform distribution. Exceptional circumstances, allow red and white elements are spaced apart paste, but should remain red, and white, each successive length should not be less than 150mm secondary body reflective logo material paste spacing shall not be greater than 150mm, level of the body reflective logo material paste spacing shall not be greater than a 300-mm.

The side of the body reflective logo on the length of Tricar shall not be less than 1.2m; The cargo compartment length is less than the conductor 50% of the freight shall be the cargo compartment length; The side body structure without a continuous surface of the concrete mixer truck and special vehicles, paste the total length shall not be less than the conductor 30% of. The van-body truck and trailer van on the side of the body reflective logo should reflect the cargo compartment profile.

The side of the body reflective logo on the material level may be different from the rear of the body reflective logo material