Product features:
1. Function: it can kill mosquitoes and lighting.
3. Super long service life battery, up to 500 times of cycle charging.
4. Charging voltage: AC110/220V 50/60Hz; Working power grid voltage: About 2000v.
5. With power protection switch, enhance safety.
6. The lighting lamp uses an energy-saving, high-power, super long service life LED bulb.
Instructions for use:
1. When charging, turn the power switch to the OFF position, push out the AC plug, and directly insert it into the AC110/220V power socket. The corresponding charging indicator light is on, indicating that electric mosquito swatter is in the charging state, it takes about 8 hours to get enough electricity.
2. Mosquito killing and lighting method: turn the power switch to ON1 position, press and hold the middle button switch, and the working indicator light is on. At this time, there is high voltage on the wire fence surface (Do Not Touch). Hold the mosquito swatter handle tightly and wave to make the grid come into contact with mosquitoes. After use, release the button switch, the working indicator light goes off, and the power grid is powered off. When the power switch is set to ON2 position, LED bulb lights up, and mosquito killing and lighting can be used at the same time.
3. Use Time: full of electricity, mosquito killing can be used for about 10 days, and bulb lighting can be used continuously for about 25 hours.
4. Electric mosquito swatter if you do not use it for a long time, please replenish the electricity for more than 8 hours every three months, otherwise it will reduce the service life of the battery.
Security matters:
1. This product should be kept away from children.
2. The installation of charging power supply and socket should conform to the safety specifications.
3. Keep away from inflammable and explosive materials when charging each time, and the charging time cannot exceed 24 hours. (It is recommended to charge during the day)
4. Do not toggle the switch or touch the mesh surface when charging the product, so as not to burn out the LED bulb, the charging parts inside the power supply or get electric shock.
5. Do not use it in places where flammable and explosive gases or liquids are stored, and do not touch metal conductive objects on the grid surface.
6. Do not let the product get wet or damp. The mosquito residue on the mesh surface can be soft brush long hair or tap several times.
Fall off.
