Shaver right usage:
1. Use a razor after repairing small scissors: If the beard is too long and then shaved, it is better to use a dual-purpose trimmer with Battery Powered Shaver, or cut the beard roughly shorter with small scissors first, and then use a razor.
II. Circle-like moving Battery Powered Shaver: After wiping the face, it is better to tighten the skin of the face slightly with your fingers, then touch the skin in a right angle to the beard, and then move the Battery Powered Shaver by drawing a circle.
III. Cleaning electric shavers: some electric shavers can reach level 7 waterproof, even if the machine is turned on and put in water for cleaning, there is no problem. In addition, if you want to install and remove Battery Powered Shaver, you must disconnect the power supply, stop the motor rotation or electromagnetic vibration, otherwise there will be a risk of being cut.
4. Dismantling electric shaver: in order to maintain the service performance of the battery, the shaver should be used within the range of 0 ~ 40℃. If you plan to use it for a long time, you should take out the dry battery and store it to avoid damaging the internal parts due to liquid leakage.
5. Apply lubricating oil to electric shaver: regularly apply a little lubricating oil to the inner surface of the outer knife, such as the rotating parts such as the supporting shaft of the inner knife or the main shaft of the motor, when refueling, you can drop a small drop of oil on your finger, then wipe the axis of the roller, or use a small wooden stick to drop, but pay attention to the amount of oil should not be too much.
Six, electric shaver charging Rechargeable Shaver charging should put the switch on the off position, and then charge it with the corresponding voltage power supply. If it is not necessary to place it for a long time after charging, it will discharge itself, which will reduce the electromotive force, therefore, Shavers placed for more than three months need to be recharged before they can be used.

Maintenance of Shaver:
The Shaver should be cleaned after every use. After use, thoroughly clean the scurf, hair, oil stains, etc. left on the cutter head and a wire fence film to avoid breeding bacteria. In terms of cleaning, electric shaver should be cleaned after two or three times. If it is waterproof, you can open the net cover and wash it directly to the outlet, but pay attention to the temperature of the water to avoid being scalded by the water. The water temperature should not be too hot; If it is not a waterproof Shaver, it is better to use a brush to gently dry brushing, do not wash the machine to avoid burning. When cleaning, use a small brush to clean the broken beard and skin scraps on the knife rest, and then gently wipe off the grease on the blade with cotton ball alcohol, do not use something harder to scrape off, otherwise it will easily damage the blade.
1. Measure skin characteristics
Generally, men grow beards from 13 to 14 years old, and the growth rate of beards is even faster than that of hair, about 0.4mm per day. Before buying a shaver, you must first understand your skin and beard. Judging from the degree of density, the beard can be divided into three categories, including beard, which is relatively thick; The beard is not too much, but the beard in the lower jaw and Adam's knot position should be specially taken care of; The beard is relatively small. In the three categories, it is easier to buy Shavers if there are fewer beards.
The usage of electric shaver is introduced here for everyone. I hope it will be helpful to everyone after reading it. During normal use, attention should be paid to the maintenance of electric shaver so as to prolong its service life.