Our company is a professional enterprise engaged in the production of standard glue needles, fine glue needles, work needles, beer barrel hand-punched needles, plumber's hand-punched needles, beaded needles, question-mark row needles, soft glue needles, V-shaped glue needles, label glue needles, nylon tape and other kinds of fashion plastic accessories. We have accumulated rich experience and advanced machine equipment for many years. We have our own mold room. This product is widely used in the production of clothing, hosiery, footwear, various types of textiles, and is also suitable for electrical appliances, tableware, hand tools, electronics, jewelry, stationery, toys, luggage, glasses, and so on. The products are widely sold to various regions in the country and Hong Kong, Macao and Taiwan, and are exported to various parts of the world. They have been widely recognized by distributors and users from various countries.

1. Before plugging in the hot melt glue gun, please check if the power cord is intact and the stand is ready; if the used glue gun has any problems such as glue leaking.
2. Before using the glue gun, please preheat it for 3-5 minutes. When not in use, please stand the glue gun upright on the desk.

3. Please keep the surface of the hot melt adhesive tape clean to prevent impurities from blocking the nozzle.
4. If the glue gun fails to discharge glue during use, please check if the glue gun is hot.
If the hot glue gun does not work normally, the possible reasons may be:
1. The glue gun power supply is not properly plugged in.
The glue gun short-circuited and burned out.
Under normal heating conditions, the reason may be:
3, The nozzle of the gun is blocked by impurities, which should be handled by professionals.
4, when the glue gun is used to pour glue to make the glue strip thicker, you can simply rotate the glue strip gently for a full turn and carefully pull it back slightly, peel off the thickened part of the glue strip, and then continue to use it.
5. Avoid using the soldering iron in humid environments, as humidity can affect the insulation performance, which may lead to electric shock.
6. The nozzle and the hot glue are extremely hot (approximately 200 degrees Celsius), so it is not allowed to contact any other parts except the handle.
7. Do not pull the adhesive tape out of the adhesive inlet, as hot melt adhesive can cause severe burns or damage to the hot melt gun.

8. Do not disassemble or install the parts of its electric heating section at will, or it may cause malfunction.
9. Do not allow children to touch, and store in a place out of their reach.
10. Except for melting glue, it should not be used for any other purpose.
11. If the hot melt adhesive in the glue gun reverses, immediately stop using it. Only after the professional personnel cleans the reverse hot melt adhesive can it be used.
12. If the hot glue gun is continuously heated for more than 15 minutes without use, please turn off the power.

 Dear customer, due to the high volume of offline transactions, if you need the goods urgently, please contact our customer service before placing the order to confirm whether there are any stock available, and then proceed with the payment after placing the order.

Warm Tip:

 Orders paid before 15:00 on the same day can be shipped by courier and logistics from the warehouse that day. Large orders are generally shipped directly from the factory by logistics, which requires the next day's shipping.

 Occasionally, express delivery may experience delays, which is a normal phenomenon. If the delivery does not arrive within the normal estimated time, please wait patiently for 1-2 days, or contact us and the express company in time for appropriate handling.

Customers with designated shipping locations for logistics shipping, please contact customer service in advance to arrange for shipping.