after the plastic sheet is heated by the manufacturer of single-Head and double-station blister mask blister machine, the molding action and product setting are completed at the molding station, and the semi-finished products after molding are transported out by chain, then, the automatic punching and cutting station completes feeding, punching and stacking, counting, and pushes the designed number of products to the packaging platform automatically. The leftover material automatically rolls into rolls to complete the production of products.

1. Molding width: 400mm

2. Forming length: 1000mm

3. Forming height: 300mm

4. Production efficiency: 60-120 times/hour

5. Power supply: 380V/220V 50Hz (three-phase four-wire)

6. Power consumption: 13KW

7. Air pump required: 5HP

8. Appearance size: 88 "× 39" × 71"

9. Weight: 400Kg

sample display

before testing the plastic mask blister machine semi-automatic blister machine, the whole machine should be inspected to remove sundries that hinder normal operation, and check whether the electrical appliances and circuits are damaged, damp or loose thread ends. If there is any fault, it must be repaired in time. At the same time, before power on, put all switch in the stop position, manual and automatic switch in the manual position.
1. The equipment consists of artificial feeding-double furnace heating-anti-SAG-blowing-molding-cooling-reverse blowing and film removal lower die table mold drop-pressing frame rise-manual pick-up 9 stations.
2. The machine is mainly composed of frame, molding device, heating device, air control system, electric control system and other structures.
3. Adopt double side heating mode, which is mainly composed of carbon fiber medium wave heating pipe, support frame for installing heating pipe, porcelain joint and other parts, and is controlled synchronously by electric power. Carbon fiber heating tube light and heat synchronous preheating is fast, power off when not heating, save a lot of energy consumption.
4. Pneumatic and vacuum system mainly include vacuum pipes, vacuum pumps, vacuum chambers, vacuum tank and double vacuum angle seat valve, etc.

Small plastic suction machine semi-automatic plastic suction machine mask plastic suction machine is mainly used for all kinds of PET, APET, PETG, PVC, PS, PP, PC, ABS and other environmental protection materials plastic products blister molding, plastic sheets can be blister into blister or blister of different shapes.
Important note:
(1) the actual production of this model developed by the new product has excellent quality and stable performance, which can completely replace imported machines.
(2) man-machine interface microcomputer touch touch screen control system, intuitive and easy to operate touch screen display and operation
(3) digital frequency conversion pull tab, you can change the speed and length at will. The length of pull tab is particularly accurate. You can change the length of pull tab (1mm) according to the number.

 
Yiwu qianchen Mechanical Equipment Co., Ltd.

Pujiang Kodi Machinery Equipment Co., Ltd.

24-hour Contact number: 13777915888