This product is primarily designed for hot press equipment, placed under the bottom surface of the hot press head, which serves as a temperature buffer, ensuring a more uniform temperature distribution. It also provides an isolation protection against static electricity leakage.

If the fabric is printed by sublimation, it needs to be printed on both sides. It is recommended to print one side of the garment, then turn it over and place a piece of white paper underneath to prevent the color from sublimating onto the silicone pad.

Product Specifications:
   1. The products are divided into anti-static black and ordinary red.

   2. Common thicknesses are 0.5-10mm; common specifications are 38*38CM, 40*50CM, and 40*60CM. Special specifications can be custom-made according to customer requirements.
   
Product Features:
 1. Silica itself has heat conduction and buffering properties, which will not cause damage to PCB, glass, etc.
   2. Highly stable to heat.

   3. Highly adhesive and non-sticky.

Application: This product is an accessory for the heat transfer printing device, serving as a heat conductor and a buffer.

Some people say that red silicone pads are good, while others say that black silicone pads are better. In fact, they are the same, just a difference in color. The silicone pad is...The softness or firmness plays a critical role. 1. For machines with uneven heating plates, using softer silicone pads can ensure that the uneven areas are supported evenly. 2. For machines with well-balanced heating plates, using silicone pads with a moderate softness and firmness is recommended.