factory direct sales taiwan medium gear reducer, noise-free maintenance

NanjiangGear MotorAdopting imported raw materials from Taiwan, the gears are designed with high-hardness oblique teeth.Please provide the Chinese text you want to translate, and I will translate it into English for you.High concentration hobbing processing; speed ratio can be adjusted from1:3~1：:6000Power from75W~3700WNot equal.The housing material is made of full aluminum shell, with stable temperature rise, and the gears are made of ...“Human-centered”Bearing, gear hard tooth surface reaches50The motor is above 90 degrees. The shell has high sealing performance, and the rotor and silicon steel sheet are all imported.IP5Anti-dust and water-resistant. Our companyThe motor features a small volume, attractive appearance, light weight, no noise, and no maintenance requirements, which has won widespread praise from our customers!Please call for more specifications!

1. 2 to 3 years without refueling, no oil leakage, and extremely low return rate.

2. Save electricity;

3. Low noise and low vibration.

4. Beautiful appearance.

5. Protection rating: IP55 (circular pin IP44);

Insulation Class: F-class (B-class for bevel-pin).

7. Single-stage gear reduction ratio range is wide: 1:3 to 200

Delivery period is about 1 day shorter.

Installation Notes:

1. The reducer must be installed on a flat and solid base, and the base bolts must be tightened to prevent vibration.

2. Power equipment - Reducers - The connection points between the drive machine and the working machine should be adjusted after installation to ensure that the three axes are coaxial.

3. The shaft outer diameter tolerance of the input end of the reducer is made according to J6, and the shaft outer diameter tolerance of the output end of the reducer is made according to JS6. The inner holes of the couplings, belt wheels, and chain wheels that are matched with the reducer must be manufactured with appropriate tolerance dimensions to avoid excessive tightness during assembly that could damage the bearings, or loose fitting that could affect the normal power transmission.

4. When chain wheels, gears, and other driving components are installed on shafts, they should be positioned as close to the bearings as possible to reduce the bending stress on the shafts.

5.NanjiangWhen assembling a motor with a reducer, apply grease to the inner wall of the hole in the worm gear head and the key precision area to avoid excessive tightness during assembly, preventing the shaft hole from rusting over time.

6. When ordering various types of Nanjiang speed reducers, if the motor weight is excessive, a supporting device should be installed.