[Operation instructions]]

Water

1) cut off the power supply before filling water

2) open pot lid water, please don't forget to close the lid after filling water, otherwise the water will not jump off automatically after opening

3) The minimum loading capacity is not less0.5L, avoid heating the chassis dry burning state

4) the maximum amount of water should not exceed the indicated place to avoid too much water and prevent boiling water from overflowing the kettle.

Boiling water

1) put the kettle body with good water on the base, and then plug it in

2) press the switch button on the handle to be in the on position. At this time, the kettle works and the indicator light is on. When the water cooker is on, the button switch will automatically jump off reboil if you need to boil again, etc.25 - 30 only after seconds can the switch be turned on again. If the switch is pressed forcibly, the working principle of the electric kettle will be destroyed. Please do not immerse the kettle in any liquid. The kettle can be cleaned with a wet cloth, the power supply must be cut off before cleaning. Corrosive cleaning agents cannot be used for cleaning.

Regular descaling

1) calcium oxide is a calcium deposit naturally formed when water is heated. It often adheres to the heating element and is harmless to human body. However, if you pour it into your drink, the taste will not be very good, therefore, regular scale removal is required.

2) during normal use, generally descaling twice a year

3) use vinegar and water1:2 mix the proportion into the kettle MAX position, then turn on the switch to boil the water, pot lid must be kept open when boiling water

4) when the water is boiled, let the mixture be stored in the kettle.10 pour out the mixture after minutes, and then fill it with clear water MAX position, then boil and pour out the boiling water, the scale and vinegar will be cleaned off, and finally clean the kettle with clean water, such as a lot of scale inside, repeat the above steps

[Precautions]]

1, please do not put the electric kettle on the hot table or beside the hot object

2 please put this product on a stable table to ensure that the kettle will not fall into the water.

3, do not immerse the kettle and base into the water, and do not penetrate the water into the internal circuit part of the kettle.

4. For the first time, pour out the water boiled for the first time, and then use it formally.

5, please be careful not to let children pull the power cord or knock the kettle