Name furniture moving system

specifications 45 * 5CM * 2 pieces

packing 24PCs/

volume 0.045m³

material steel paint

do you want to easily move furniture such as refrigerators?
The pulley structure of this product allows you to move refrigerator furniture at home with half the effort.
When you do not want to slide, the product pulley can be used for brake lock.

There is no doubt that it is made of carbon steel plate and sprayed with plastic bearing force.

Product gross weight: 1.2kg.

It is suitable for rectangular base refrigerators with different sizes (furniture moving system telescopic range is about 45-70cm, suitable for refrigerators with one side length of 45.6-70cm), one set of two, and the price is the price of one set.
Load: less than 273kg

packing: white cardboard

Because the product is mainly aimed at European mail order, the instruction manual is in English, and we have made a simple translation for users' reference for the matters needing attention. Due to our limited level and improper translation, please understand.

Placement method:
1. Loosen the nuts used to adjust the length, adjust 2 furniture moving system to the size suitable for refrigerator base, and then tighten the nuts.

2. Tilt the refrigerator to one side, and then put a furniture moving system near the bottom of the refrigerator.

3.4. Make sure that the two feet of the raised base of the refrigerator are aligned with the two furniture moving system pieces of black rubber pad when it is put down.

5. And brake handle is opened on the inside,.

6. Now raise the other side of the refrigerator and put the second furniture moving system. The method is the same as above.

Move method:
1. Release 2 furniture moving system brakes.

2. Pull out the guide handle, but do not pull them to move the refrigerator!

3. Adjust the direction of the guide handle, and keep the direction of the two pieces consistent.

4. Now you can move the refrigerator in the direction you choose.

5. After reaching the specified position, put the straight Guide handle, insert it back to the original position, and then lock the brake.