Product Introduction

1. Install the batteries: Unscrew the "tail cover", then insert 3 AAA 7th battery cells according to the positive identification in the battery compartment. If the light does not illuminate after inserting the batteries, immediately remove them and check if the batteries are correctly installed; then screw the tail cover back on (the product does not include batteries).

Charging model:Color box size: 7.5*7.5*7.5cm, weight: 99g, built-in lithium battery, battery life: about 4-5 hours.

2. Product parameters: 

Product Name: Outdoor Camping Tent Light 

Luminaire: 6 high-brightness SMD 5730 

Product lumens: High brightness 200LM, low brightness 150LM 

Discharge time: High brightness for 6 hours, low brightness for 12 hours. 

Switching Mode: Turn on to enter the high-brightness state, press briefly to enter the low-brightness state, press briefly again to enter the strobe light state, and then press briefly to turn off. 

Power: 3W 

Power Supply: 3 AAA 7-cell batteries 

Material: Shell ABS, Lampshade PP 

Protection rating: IP43 

Weight: 50g 

Magnet: The product base cover is equipped with a strong magnet that can adhere to iron surfaces, with good magnetic properties. 

This product is currently available in two colors: bright red and sky blue. 

3. The product comes with hooks, which can be hung in tents, on walls, branches, or ropes, making it convenient and easy to use. 

4. Use Caution: 

Before using, please read the instruction manual carefully. 

Please replace the batteries promptly when the light is dim to ensure the normal operation of the LED.

5. Maintenance and Maintenance:  

Wipe the product surface with a clean cotton cloth and a small amount of alcohol. 

② Do not use hard or volatile chemicals to clean the tent light, or it will damage the plastic parts; 

③ To avoid damaging the tent light, please do not mix batteries of different specifications together; 

Please do not leave the product in a high-temperature or humid environment for a long time when it is not in use. 

Non-technical personnel should not repair the equipment without permission.