[Name] frosted non-slip breathable sweat absorbing/grip tape

 [Features] frosted wear-resistant \sweat-absorbent \non-slip \breathable

 [Color] Black/purple/yellow/red/light blue 5 colors randomly sent

 [Specification] length * thickness * width: 115CM * 2.5cm * 0.75MM

step 1 press the thin end (start end) of sweat absorbing on the side of the bottom cover of the racket handle. Generally, double-sided adhesive stickers are attached to the beginning of sweat absorbing. Press sweat absorbing

fixed as shown in the following figure. If you take a left hand-held shot, the direction is opposite.
Step 2: hold the handle with your left hand finger to rotate it clockwise. At the same time, the right hand controls the direction of the sweat absorbing to align the sweat absorbing. The edge of sweat absorbing is OK

to overlap with each other, the amount of overlap depends on personal preference, generally 2mm.
Step 3 wrap the sweat absorbing to the bottom according to the above method. At this time, cut off the extra sweat absorbing. If necessary, trim the upper edge of the sweat absorbing.
Step 4 prepare the attached tape and wrap the end of sweat absorbing with tape until it will not spread out.

PU grip tape, no fading, no odor, General elasticity, applicable scope: fishing rod fishing gear, slingshot, fitness equipment, bicycle handle, etc. Badminton racket, tennis rackets.