Look here: 1. We are factory direct sales, welcome to factory inspection at any time.

2. Our school desk and chair are all well-punched, no professional installation tools are needed, and the installation tools are free of charge.

3. More than 300 sets of large goods, we do not provide punching, service, if necessary, please consult customer service.

Note before placing an order: due to the particularity of products in this industry, we do not bear the freight. By default, we send logistics, which needs to be picked up at the consignment station, and the freight can be paid on arrival; if the delivery is delivered to the door of the community or downstairs, do not go upstairs), please contact customer service to make up the delivery fee; The delivery fee does not include the unloading fee, and the logistics is not responsible for unloading, please pay attention!!

The iron frame of this product is loose package, and the desktop and chair surface (except yellow multi-layer board) are all packed in cartons. Please understand that there is inevitable paint touching during Logistics, which does not affect the use of the product. Please be careful to order if you are a perfectionist!!!

The above school desk and chair are in stock, and the goods will be delivered within 72 hours after the order is placed.

Desk panel size 650mm * 450mm * 30mm(± 5mm)

material: ABS impact-resistant plastic first-class new material integrated injection molding is required. Impact strength: it must be able to withstand 5 pounds hammer gravity hammer and cannot break. Recycled materials shall not be used for production. The bottom of the panel has a reinforced load-bearing design. Lock in one load-bearing square steel pipe and flush with the bottom of the panel. The size specification is 15mm × 30mm × wall thickness 1.0mm. Locked by screws at the bottom of the panel

bookcase:

material: PP impact-resistant first-class new material which meets the national standard is integrated injection molding, which is tough and not brittle;

size: The net height inside the class bucket is 145mm, the net depth inside is 360mm, the net width inside is 450mm, and the plastic hooks on the left and right sides of the class bucket and bookcase are integrated into one injection molding.

Function: bookcase bottom has Rhone seam, with drainage and ventilation function. Bookcase the internal front is equipped with small stationery storage such as concave note pens, eraser, Blade, cloth, etc. Bookcase bottom has Rhone seam design, Rhone seam is not less than 42, bookcase to the back end has a design of 2~3 degrees, the main function is to prevent books and stationery from falling forward easily, slot function cleaning or wiping bottom easy drainage ventilation dry, bookcase bottom with reinforcing ribs

table steel frame:

material and shape: Oval steel pipe, made of CO2 full welding;

steel pipe size: The floor foot of the table and chair Adopts 25*54 * 1.5mm flat round tube, and the floor Foot adopts arch forming process, which has strengthening function and makes it firm and durable. The lower leg of the table and chair adopts 30*60 * 1.2mm flat round tube, the upper lifting tube adopts 20*49 * 1.2mm flat round tube, and the desk bucket fixed pipe adopts 20*40 * 1.2mm flat round tube U-shaped elbow; 20*40*1.2mm flat tube is used for connecting rungs.

Coating: steel frame after the welding is completed, the high-quality brand paint powder is adopted. After high-temperature powder baking paint, it is scratch-resistant and wear-resistant, and the surface paint will not peel off after long-time use;

. Lifting function: the left and right tripod uses stamping punching to fix the lifting hole, and uses M8 screws to fasten and fix it. The height of the hole can be adjustable screws according to the height of the hole. Each level can be adjusted and lifted by 30mm.

Foot pad:

material: pp plus fiber reinforced plastic Integrated injection molding;

chair:

seat screed board size seat 430 * 380mm(± 5mm)

backrest size 430 * 340mm(± 5mm)

material: adopt PP plastic first-class new material integrated injection molding. Impact strength: it must be able to withstand 5 pounds hammer gravity hammer and cannot break. Recycled materials shall not be used for production.

Function: The backrest has a convection seam design, which has a breathable effect. The seam width is less than 6mm, which meets international safety standards; The backrest design has a complete curve Radian, it can cover and support the back spine of a growing middle school child, so that it can avoid lateral bending; There is a 20mm concave vortex design in the middle of the cushion, which allows students to sit on the whole hip in the concave, in this way, all the weight of the upper body can be dispersed to make the school children grow more comfortable and healthier when learning. The front end of the cushion has a wave design, which can greatly relieve the stress and involuntary shaking of the feet.

Additional function: the back of the backrest is equipped with reinforcing ribs to make the back stronger.

Chair steel structure:

material and shape: Oval steel pipe; Made of CO2 full welding;

the floor foot of the table and chair Adopts 25*54 * 1.5mm flat round tube, and the floor Foot adopts arch forming process, which has strengthening function and makes it firm and durable. The lower leg of the table and chair adopts 30*60*1.2mm flat round tube, the upper lifting tube adopts 20*49*1.2mm flat round tube, and the backrest tube adopts 20*40*1.2mm flat round tube elbow; 20*40*1.2mm flat tube is used for connecting rungs.

. Coating: steel frame after the welding is completed, the high-quality brand paint powder is adopted. After high-temperature powder baking paint, it is scratch-resistant and wear-resistant, and the surface paint will not peel off after long-time use;

lifting function: the chair is lift way consistent with the desk, and the M8 Bolt is used to tighten the lifting, and the height of each level can be raised and lowered by 30mm.

Foot pad: Material: pp plus fiber reinforced plastic Integrated injection molding;

appearance: The surface is not allowed to have cracks, damages, obvious repair marks, and obvious color difference stool defects; The edge is smooth and smooth without layering; The appearance and inner surface and the hidden place that can be touched by fingers, no sharp edges or burrs are allowed.

Flatness: screw installation should be tightened, and tables and chairs should be stable without tilting and swaying.