1. Operating Instructions:
Insert the battery into the battery compartment following the instructions, and place the scale on a level, wind-free surface.

Button Instructions:

ON/OFF: Power button

PCS: Count Key

TARE:去皮键

UNTS/MODE：Unit Conversion Key

1. Press the ON/OFF button to turn on the device, and wait for three seconds to display 0 or 0.0 or 0.00 or 0.000.

2. Place the item to be weighed on the scale pan and read the value after the number stabilizes.
3. Press the unit conversion key to change the weighing unit.
4. Press the power button to turn off the device while it is on.

Key for Unit Conversion: UNTS/MODE
Press this button to select the weight measurement unit you need, with multiple units available for conversion.
Unit of weight conversion value:
1ct/克拉 = 0.19997g 1oz/盎司 = 28.3495g
1dwt/英钱=1.5552g 1ozt/金衡盎司=31.1034g
1 gram = 0.0648 gram 1 gram = 37.4999 gram

Section 3: Adjusting the Weight/Removing the Skin

1. Power-on reset to zero.
2. Place the weight on the scale pan.
3. Press the TARE key (or the T key) to display 0.0 or 0.00, indicating that the weight has been deducted.
4. Then place the item to be weighed, and the reading at this time is the net weight of the item.

Fourthly, correction: Correction must necessarily have corresponding weights.

Kitchen scale, jewelry scale calibration method:

School scale mode:

1. In standby mode, hold down the [TARE] or [T] key without releasing it, then press and hold the [ON/OFF] key for 2 seconds to turn on the machine, which will enter the internal code test mode. At this point, press the [MODE], [UNIT], or [M] key briefly to enter the calibration mode. The display will show "CAL".

2. In the weighing mode, press and hold the [MODE], [UNIT], or [M] key to enter the calibration mode, at which point the display will show "CAL".

Calibration method:

Enter the school scale model display 'CAL' after one of the two modes, and then press the [MODE], [UNIT], or [M] key again. The display will show 'CAL' and flash a few times, showing the calibration weight. Place the corresponding weight on the scale plate, stabilize for 3 to 4 seconds, and complete the weight calibration. After displaying 'PASS', press the [ON/OFF] key to turn off the machine to complete the calibration.

Electronic measuring spoon calibration method:

School scale mode:

In standby mode, press the TARE key to turn on the machine, then release it immediately and press the other two keys (MODE/HOLD key) simultaneously. Wait until a series of numbers appears on the screen. Then release your fingers. Press the MODE key once.

1. For example, with 300g/0.1g (requiring secondary calibration), then the character '150g' will be displayed. Then place a 150g weight. Wait for the digital display to show '300g'. Then place a 300g weight, and after the screen displays 'PASS', press and hold the TARE key to turn off the machine, and then remove the weights. Reboot the machine and place the weights again to check the accuracy of the calibration scale.

2. For example, with 500g/0.1g (requiring secondary calibration), then the character '200g' will be displayed. Then place the 200g weight. After a while, the number will continue to display '500g'. Then place the 500g weight, and wait until the screen displays 'PASS'. Then press and hold the TARE key to turn off the machine, and then remove the weights. Turn the machine back on and place the weights again to check the accuracy of the calibration scale.

Five, Counting Function (Available for Some Products Only)

Under normal weighing conditions, place a certain number of samples (system pre-sets 25, 50, 75, 100 four sample quantities for selection) on the scale plate, hold down the "PCS" key without releasing it for 2 seconds, and the display will show the sample quantity. Then release the "PCS" key, press the "MODE" key (or "M" key, "UNITS" key) to switch to different sample quantities. After selecting, press the "PCS" key to confirm the sample quantity and enter the counting state. If you need to change the sample quantity, just re-set the above steps. In the counting state, press the "MODE" key (or "M" key, "UNITS" key), the system will exit the counting state and return to the normal weighing state to display the weight value.

6. Usage Instructions:
1. The product/regulation/large weighing should not exceed its/regulation/large scale + 2%.
2. Overloading will/once/destroy the product.
3. The product should not be exposed to extreme cold or hot environments. It can work well in normal environments. Please allow the product to adapt to a new environment for at least one hour before use.
4. Before use, turn on the scale and weigh several times with weights to preheat the internal components, which will make the weighing more accurate.
5. Place the product in a clean environment. Dust, moisture, vibration, airflow, or electromagnetic interference can all have adverse effects on the stability and precision of the product.
6. Handle with care, and when weighing, place the item gently on the scale pan to ensure accuracy and prevent damage to the scale's internal parts.

7. Since the product is of high precision, it should be used with great care to avoid vibration or drops.
8、Use on a stable, windless horizontal surface.

7. Troubleshooting:
The primary factors contributing to inaccurate or faulty weighing are insufficient battery power, incorrect calibration, overloading, or operating on an uneven surface. Please note the points mentioned to ensure proper use and maintenance of your product.
1. Do not display or display the power shortage symbol [lo] needs to change the battery.
2. [EEEEE] Overload, immediately move the overloaded items;
3. [o_ld] Due to incorrect operation causing damage to the scale's internal components (e.g., impact, drop, or overloading), please try recalibration. If the sensor is not severely damaged, it can be used after recalibration.
4. Display 88888, please work on a flat surface that is free from vibration and stable.

8. Buyer's Notes
1. All products sold by our company are photographed from actual items. Due to differences in lighting sources or the resolution of computer monitors, there may be slight color differences. Please refer to the actual items. Color differences are an unavoidable issue in online trading, and we are trying our best to control them. Please agree before making a purchase.
2. Within seven days from the date of receipt of the electronic scale, if you are not satisfied, please keep the original packaging intact, all accessories, and the machine without wear. You can handle the return matter. If any quality problems occur within 7 days, we will provide a replacement (your machine must ensure that its appearance, shell, display, mirror, scale plate and the original stainless steel surface (if any) are not worn or lost, all accessories and the labels on the body are complete, and the packaging is well preserved).
3. The quality problem of the electronic scale host caused by non-human factors is warranted for one year.
4. The warranty service is only valid under normal use. Any damage caused by human factors (e.g., user disassembly, water immersion, use contrary to the instructions, damage due to other accidents, unapproved repairs and modifications, upgrades, etc.) is not covered by the free warranty.
5. All the products sold by our company are /original factory/, but they are not perfect and flawless. Please carefully weigh the market price and product description to ensure that you get what you pay for.
6. If you encounter any quality issues or other problems with the products after receiving them, please feel free to contact us immediately. We will do our utmost to satisfy each and every customer. Please do not give negative or neutral reviews lightly. A good reputation is hard-earned and we cherish it greatly. We also hope to receive your understanding and support. Thank you!

Home electronic scales, kitchen scales, kitchen electronic scales, electronic scale wholesale manufacturers, direct sale from a quality factory in Shenzhen!