Name: INTEX 56591 Smile Whale Sunshade Seat Cushion

Specification: 99*86cm, Weight per unit: 0.6kg, Load bearing: 15kg

12 pieces/case, weight: 6.79kg, volume: 0.029m3
Material: High-density heat-resistant carbon-reinforced polymer, 0.25mm plastic material.
Suitable for ages: 1-3 years old babies (the age can be appropriately increased according to the baby's body shape, size, preferences, product load capacity, and specifications). The leg hole is 12CM in diameter, with a hanging color box packaging and a dual-chamber structure.
Execution Standard: GB-6675 of China National Standard; ASTM F-963 of the United States; EN-71 of the European Union.

Warning: Non-professional life-saving equipment (used on water) should only be used under proper supervision.

Dear guests, hello:

Please read the following after-sales rules carefully. Once you place an order, it will be deemed as your agreement to the terms.
Please buyers before placing an order, according to their actual situation and needs, determine the number of orders and accessories! Inflatable products need to be equipped with an inflatable tool to use, and inflatable tools are not shipped, you need to buy separately.
②. About after-sales service: We are only responsible for inspecting the goods and sending them out in their original condition. We do not assume any responsibility for the various after-sales issues that may arise. Any after-sales issues must be handled and resolved by the buyer themselves. We do not provide exchange or return services for wholesale prices!

Inflatable Product Repair:
To find the leakage point: fill it up to the brim, place your hand close to the surface, or where your skin is sensitive, close to the surface, feel it, and where there is a breeze coming out is where the leakage point is. Search little by little, be patient, and you will find it!

Needle eye patching method: First, release most of the air, leaving a little inside, and drop a few drops of glue on the hole, blocking the hole. When the glue is almost dry, press it slowly flat, and then press it hard for 2-3 minutes and release it. After 2-3 hours, you can inflate it again.

The larger repair method: First, release most of the air from the product. If the crack is fuzzy, wet the fuzzy surface first, and use a dull object to scratch the fuzzy surface around the crack. Or apply some glue to the edges of the crack, and scratch the fuzzy surface with a toothpick to make it fall off. Then, smooth the crack, cover it with glue, press it flat when the glue is almost dry, and press slowly. Repeat the same process with glue, and then cut a patch larger than the crack. Use the patch to cover another layer, press for a few minutes, and wait for the glue to dry. After the glue dries, press with a heavy object for a few hours before using the product again.

Details come from professionalism and attention to detail. Please trust our dedication and expertise, which will enable us to serve you better and more thoroughly!!!