additional tax points for invoicing, contact customer service for details!

This product is made of zinc alloy and pure copper. This link is the price of zinc alloy. Please contact customer service for the price of pure copper!!

Note:
the freight incurred by the product you see or order is only the reference price. Please contact customer service to modify the freight according to the required transportation method when ordering. If the freight is insufficient, we will not ship the product without authorization, thank you for your understanding and cooperation!

Common sense of daily maintenance of faucet:

1. When installing the faucet in the new house, first drain the water to clean the sand and gravel impurities in the pipeline. So as not to block and affect the water.

2. Please install the faucet by experienced and qualified professionals. During installation, the faucet should not bump with hard objects, and cannot touch cement, glue, paint and other objects with abrasion, corrosion and corrosion on the surface of the faucet.

3. After the faucet is used for a long time, the water output may be reduced. Use tools to unscrew bubbler, clean the filter screen and install it back carefully.

4. Light opening and light closing are especially important. Any reckless and deliberate behavior may damage the seal of the faucet and lead to failure.

5. The faucet should always be wiped with soft and clean water to ensure that the faucet is bright. Try not to clean it cleaning solution. Do not use corrosive acid-base solution.

Faucet maintenance method

faucet plays a very important role in sink accessories. Many consumers leak faucet due to improper use and lack of maintenance awareness, which brings a lot of inconvenience to kitchen life. In fact, as long as installation, use, the maintenance is correct, the actual service life of the faucet can last for a long time, and it can keep bright as new all the time.

1. Uneven water outlet or small water outlet: it may be because the tap the mouth of the Nets (water outlet or bubbler) is blocked by the mouth of the Nets due to water quality problems. The solution is: take out the mouth of the nets of the water outlet, just clean it with a waste toothbrush; Another possibility is that impurities block the water hose of the faucet. The solution is: take out the water hose and clean it.

2. Can't shut down the water: there must be something wrong with the valve core. You can take out the red and blue mark, remove the faucet handle with the inner hexagon tool, and replace the valve core (this is usually handled better by professionals or manufacturers).

3. The chrome coating on the surface of the faucet turns into flowers or water mist appears: the method is to wipe off the water with a dry cloth, and wash it with vinegar seriously.

Special note: do not scrub the faucet surface with steel wire ball!

4. When you switch the faucet, be careful not to use too much force, as long as you rotate it gently, don't think that if you don't twist it hard, the faucet will leak and cause waste. In fact, it is not, even if it is a traditional faucet, don't spend a lot of effort to twist it to death. If it lasts for a long time, it will accelerate the damage of the valve core in the faucet. Especially, don't use the faucet as a handrail to support the body, other heavy objects or use it, in order to avoid leakage caused by excessive loose load.